IEC 60068-2-1 IEC60068-2-2 Constant High Low Temperature And Humidity Cycling Chamber
IEC 60068-2-1 IEC60068-2-2 Constant High Low Temperature and Humidity Cycling Chamber Constant High Low Temperature and Humidity Cycling Chamber is according to IEC60068-2-1(GB/T2423.1) and IEC60068-2-2(GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08,Website:, electricity products, electronic components, material and so on.Specification:•The chamber is produced by SUS304 Steel, the temperature keeping material is produced by Polyurethane hard foam and ultra-fine fibre glass, the doorframe heat insulated by Double high temperature aging silicone rubber door sealing strip.•The temperature controller is used by Korean TEMI display in English/Chinese and German Siemens PLC, it can be communicated to PC via RS-232. The temperature accuracy is 0.1℃ and humidity is 0.1%R.H•The temperature sensor is platinum PT100 Ohms/MV resistor•The heating system is full separately system which produced by Nickel chromium alloy electric heating type heater•The cold system is applied by fully enclosed fan cooled single-stage and cascade refrigeration mode, the compressor is from France TECUMSEH brand which can allow you get after sales support from many countries•The cyclical system is applied by High temperature low noise air conditioning type motor and Multi blade centrifugal wind wheel•The safety self-protection function include Electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over-current protection•Working Power: AC380V±10% 3phases and frequency 50Hz/60Hz•Working Environmental: Temperature is 5℃～+30℃ Humidity ≤85%R.HHigh & Low Temperature and Humidity Chamber with Programmable Function (GDJS Series)Model (cm)GDJS-225*GDJS-500*GDJS-010*GDJS-013*GDJS-015*Workroom Dimensions50x60x7570x80x90100x100x100100x100x130100x100x150Exterior Dimensions105*102*200132*132*217167*152*231217*152*231245*160*231Work Power7.0kW13.5kW15.0kW16.5kW16.5kWTemperature RangeA: -20℃-150℃ B: -40℃-150℃ C: -60℃-150℃Humidity Range30%~98% R.HFluctuation/Evenness±0.5℃/±2℃Humidity Deviation-2%~-3% R.HTemperature Rise Speed1.0℃~3.0℃/minTemperature Down Speed0.7℃~1.0℃/min
High and Low Temperature Chamber with Programmable Function (GDJW Series)Working Room SizeGDJW-225*GDJW-500*GDJW-010*GDJW-013*GDJW-015*Workroom Dimensions (cm)50x60x7570x80x90100x100x100100x100x130100x100x150Temperature RangeA: -20℃-150℃ B: -40℃-150℃ C: -60℃-150℃Fluctuation/Evenness±0.5℃/±2℃Temperature Rise Speed1.0℃~3.0℃/minTemperature Down Speed0.7℃~1.0℃/min The * in GDJS-225* means the temperature range A: -20℃-150℃, B: -40℃-150℃, C: -60℃-150℃
Другие товары поставщика
|
|
|
High Precision Spectroradiometer Sphere LED Testing Equipment LPCE-2 is an Integrating Sphere Spectroradiometer LED Testing System for identifying ... |
|
|
|
IEC 62471 LED Radiation Safety Test IECCIE S009) Photobiological Safety of Lamps and Lamp System and IEC TR Guidance on Manufacturing Requirements ... |
|
|
|
kHz~30MHz EMI Test Equipment KH3961 is an automatic EMI Test Equipment. It is a main test system for EMI (Electro Magnetic Interference) testing. T... |
|
|
|
Lamp Start,Website:, Run-up time and LED Flicker Test Dated 14th December, 2012, the EU officially released the (EU) NO 1194/2012rules.Compared wit... |
|
|
|
Lumen Flux Measurement for SSL Products LPCE-2(LMS-8000) is a Lumen Flux Measurement for SSL Products. LED's quality should be tested by checking i... |
Все товары поставщика
Похожие товары
