IEC 60068-2-1 IEC60068-2-2 Constant High Low Temperature And Humidity Cycling Chamber
IEC 60068-2-1 IEC60068-2-2 Constant High Low Temperature and Humidity Cycling Chamber Constant High Low Temperature and Humidity Cycling Chamber is according to IEC60068-2-1(GB/T2423.1) and IEC60068-2-2(GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08,Website:, electricity products, electronic components, material and so on.Specification:•The chamber is produced by SUS304 Steel, the temperature keeping material is produced by Polyurethane hard foam and ultra-fine fibre glass, the doorframe heat insulated by Double high temperature aging silicone rubber door sealing strip.•The temperature controller is used by Korean TEMI display in English/Chinese and German Siemens PLC, it can be communicated to PC via RS-232. The temperature accuracy is 0.1℃ and humidity is 0.1%R.H•The temperature sensor is platinum PT100 Ohms/MV resistor•The heating system is full separately system which produced by Nickel chromium alloy electric heating type heater•The cold system is applied by fully enclosed fan cooled single-stage and cascade refrigeration mode, the compressor is from France TECUMSEH brand which can allow you get after sales support from many countries•The cyclical system is applied by High temperature low noise air conditioning type motor and Multi blade centrifugal wind wheel•The safety self-protection function include Electric leakage, short circuit, over temperature, motor overheating, compressor pressure, overload, over-current protection•Working Power: AC380V±10% 3phases and frequency 50Hz/60Hz•Working Environmental: Temperature is 5℃～+30℃ Humidity ≤85%R.HHigh & Low Temperature and Humidity Chamber with Programmable Function (GDJS Series)Model (cm)GDJS-225*GDJS-500*GDJS-010*GDJS-013*GDJS-015*Workroom Dimensions50x60x7570x80x90100x100x100100x100x130100x100x150Exterior Dimensions105*102*200132*132*217167*152*231217*152*231245*160*231Work Power7.0kW13.5kW15.0kW16.5kW16.5kWTemperature RangeA: -20℃-150℃ B: -40℃-150℃ C: -60℃-150℃Humidity Range30%~98% R.HFluctuation/Evenness±0.5℃/±2℃Humidity Deviation-2%~-3% R.HTemperature Rise Speed1.0℃~3.0℃/minTemperature Down Speed0.7℃~1.0℃/min
High and Low Temperature Chamber with Programmable Function (GDJW Series)Working Room SizeGDJW-225*GDJW-500*GDJW-010*GDJW-013*GDJW-015*Workroom Dimensions (cm)50x60x7570x80x90100x100x100100x100x130100x100x150Temperature RangeA: -20℃-150℃ B: -40℃-150℃ C: -60℃-150℃Fluctuation/Evenness±0.5℃/±2℃Temperature Rise Speed1.0℃~3.0℃/minTemperature Down Speed0.7℃~1.0℃/min The * in GDJS-225* means the temperature range A: -20℃-150℃, B: -40℃-150℃, C: -60℃-150℃
Other supplier products
|
|
IEC 60529 DIN40050 And IP5K0 Dustproof Sand And Dust Test Chamber For IP5X And IP6X |
IEC 60529 DIN40050 and IP5K0 Dustproof Sand and Dust Test Chamber for IP5X and IP6X The Dustproof Sand and Dust Test Chamber SC-015 is according to... |
|
|
Thermal Chamber |
Thermal Shock Test Chamber Thermal Shock Test Chamber can be used in the temperature shock test and fast-changing temperature test in a wide range ... |
|
|
IEC 60529, IEC 60598, IEC 60335 And IEC 60034-5 Water Ingress Testing Equipment For IPX1 To IPX8 |
IEC 60529,Website:, IEC 60598, IEC 60335 and IEC 60034-5 Water Ingress Testing Equipment for IPX1 to IPX8 JL-X Water Ingress Testing Equipment is a... |
|
|
IEC 60068-2-1 IEC60068-2-2 Constant High Low Temperature And Humidity Cycling Chamber |
IEC 60068-2-1 IEC60068-2-2 Constant High Low Temperature and Humidity Cycling Chamber Constant High Low Temperature and Humidity Cycling Chamber is... |
|
|
IEC 60335 Safety Of Electrical Household Appliances Test System: ACW, IR, LLC, GR And Power Test |
IEC 60335 Safety of Electrical Household Appliances Test System: ACW,Website:, IR, LLC, GR and Power Test The LS9934/LS9935 Automatic Safety Test ... |
All supplier products
Same products
