Boil Test Apparatus for Safety Glazing Materials in Buildings

Function: Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling.

Related Standard:

1. EN ISO 12543 – 4 Glass in building -Laminated glass and laminated safety glass – Part 4: Test methods for durability – Clause 5 High-temperature test
2. AS/NZS 2208 Safety glazing materials in buildings – Appendix F Boil Test
3. ANSI Z97.1 Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test – Clause 5.3.2 – ( 1 ) Boil Test

Technical Data:

Outside Size: 500mm*300mm*580mm

Inner Size: 395mm*260mm*495mm

Working Voltage and Frequency : AC220V/50HZ

Power: 3KW

Apparatus:The apparatus include two water baths and one temperature control device, each water baths is of sufficient size to hold the test specimen fully immersed vertically on edge for the duration test.

Principle:Specimens are immerse in hot water and boiling water for specified period of time and inspect bubbles and other defects

Working Environment:

Temperature: 20℃±5℃

Atmospheric Pressure: 8.60×10⁴Pa-1.06×10⁵Pa

Relative Humidity: 40%-80%

Instructions:

1, Place the boil test equipment stably, and put the sample holder into the box;

2, Pour water into box, control the water level is about 50-80mm from the top of the box, cover the box;

3, Switch on the power supply, set the temperature-controlled meter to required temperature (63~69°C).

4, When the temperature reach the required temperature (63~69°C), place the samples vertically on the sample holder inside the box,3 minutes later, take out the samples and quickly put them into another boiling test box, after 2 hours, take out the samples and observe.

5, Disconnect the power supply, drain the water after cooling.

Matters needing attention：

1, check whether the box is deformed or damaged before use.

2, check the water level in the box before switching on the power supply.

3, keep the box dry and maintain regularly when it is not used for a long time.

4, it is normal to have a little scale after heating for a long time. Please clean up in time so as not to affect the heating effect.

Packing details:

Plywood case （Meet import and export requirements）

Packing Size: 650mm*535mm*900mm

Total Weight: 49kg

Другие товары поставщика

	227 g/508 g/1040 g/2260 g Steel Ball Impact Test For Laminated Glass	227 g/508 g/1040 g/2260 g Steel Ball Impact Test For Laminated Glass Function: Determination of whether the safety glazing material has a certain m...
	Quality Control Test Equipment for Safety Glass	Function: Determining the resistance of glazing material to impact by the penetration method. Principle: The specimen is supported vertically in a...
	IG Dew Point Meter	Function: Measuring dew point meter of insulating glass Related Standard: ISO 20492 Glass in buildings — Insulating glass GB / T 11944 Ins...
	Pummel Machine For Adhesion	Function:Pummel test equipment for detect the adhesion of the interlayer of the laminated glass. Technical Data:Hammer head diameter: 30mmImpact D...
	Pendulum Shock Device For Impact Test of Elevator Landing Door	Pendulum Shock Device For Impact Test of Elevator Landing Door Related Standard: GB 7588-2003 Safety rules for the construction and installation o...

Все товары поставщика

Похожие товары

	Walk In Environmental Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application JOEO Multi-functional walk in environmental chamber is the perfect testing place for ...
	Solid Walk In Test Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application: JOEO solid walk in test chamber is an all-welded test chamber with an integrated con...
	Compact Walk In Environmental Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application JOEO compact walk in environmental chamber is used to test full-size solar panels or ...
	Drying Walk In Environmental Chamber	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	Application Dry walk in environmental chambers are a special type of walk in environmental chambe...
	Walk In Test Chamber For CATL Battery	Продавец: Guangdong ALI Testing Equipment Co,.Ltd	CATL Battery Walk In Test Chamber JOEO Walk In Test Chamber's temperature cyclic stress screening...