Boil Test Apparatus for Safety Glazing Materials in Buildings

Function: Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling.

Related Standard:

1. EN ISO 12543 – 4 Glass in building -Laminated glass and laminated safety glass – Part 4: Test methods for durability – Clause 5 High-temperature test
2. AS/NZS 2208 Safety glazing materials in buildings – Appendix F Boil Test
3. ANSI Z97.1 Safety Glazing Materials Used in Buildings – Safety Performance Specifications and Methods of Test – Clause 5.3.2 – ( 1 ) Boil Test

Technical Data:

Outside Size: 500mm*300mm*580mm

Inner Size: 395mm*260mm*495mm

Working Voltage and Frequency : AC220V/50HZ

Power: 3KW

Apparatus:The apparatus include two water baths and one temperature control device, each water baths is of sufficient size to hold the test specimen fully immersed vertically on edge for the duration test.

Principle:Specimens are immerse in hot water and boiling water for specified period of time and inspect bubbles and other defects

Working Environment:

Temperature: 20℃±5℃

Atmospheric Pressure: 8.60×10⁴Pa-1.06×10⁵Pa

Relative Humidity: 40%-80%

Instructions:

1, Place the boil test equipment stably, and put the sample holder into the box;

2, Pour water into box, control the water level is about 50-80mm from the top of the box, cover the box;

3, Switch on the power supply, set the temperature-controlled meter to required temperature (63~69°C).

4, When the temperature reach the required temperature (63~69°C), place the samples vertically on the sample holder inside the box,3 minutes later, take out the samples and quickly put them into another boiling test box, after 2 hours, take out the samples and observe.

5, Disconnect the power supply, drain the water after cooling.

Matters needing attention：

1, check whether the box is deformed or damaged before use.

2, check the water level in the box before switching on the power supply.

3, keep the box dry and maintain regularly when it is not used for a long time.

4, it is normal to have a little scale after heating for a long time. Please clean up in time so as not to affect the heating effect.

Packing details:

Plywood case （Meet import and export requirements）

Packing Size: 650mm*535mm*900mm

Total Weight: 49kg

Other supplier products

	Flatness Meter(Measuring Span 500 mm)	Flatness Meter (Measuring Span 500 mm) Function:Measurement of arcuate form and wave form of tempered glass Related Standard: 1) GB 15763.2 Safety ...
	人头模型冲击试验支架	汽车玻璃人头模型试验框架 安全玻璃检测设备 汽车玻璃冲击 参照标准：GB/T 5137.1-2002汽车安全要求玻璃试验方法第1部分：力学性能试验 试验目的：评价在钝物冲击下安全玻璃是否具有最低强度或粘结强度 长*宽*高 1400mm*666mm*320mm 试样尺寸：1100mm&tim...
	IG Dew Point Meter	Function: Measuring dew point meter of insulating glass Related Standard: ISO 20492 Glass in buildings — Insulating glass GB / T 11944 Ins...
	Tempered Glass Flatness Measure	Function: Measurement of arcuate form and wave form of tempered glass Related standard: 1) GB 15763.2 Safety glazing materials in building &ndas...
	Pendulum Impactor for EN 12600	Reference standard:BS EN 12600:2002Glass in building – Pendulum test – Impact test method and classification for flat glass Technical ...

供应产品

Same products

	Double Convex Lenses	卖方: Shandong Yanggu Constant Crystal Optics, Inc	Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga...
	Wedge Prism	卖方: Shandong Yanggu Constant Crystal Optics, Inc	Wedge prismis an optical element with plane-inclined surfaces, usually the faces are inclined tow...
	Ball Lenses	卖方: Shandong Yanggu Constant Crystal Optics, Inc	Ball Lensesare commonly used to improve signal quality in fiber coupling applications, or for use...
	KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery	卖方: Xin Tang Shallow Power Supply Co.,LTD	KAZUKI 6-GFM-33 12V33Ah AGM Gel Battery Small Office & Retail UPS Backup Power Systems...
	Wholesale Lead Acid Batteries	卖方: Xin Tang Shallow Power Supply Co.,LTD	Wholesale Lead Acid Batteries provides a complete range of lead-acid batteries, including AG...