Steel Ball Impact Tester
Steel Ball Impact Tester
Function: Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
Suitable for impact test of safety glass and tempered glass.
Related Standard:
ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests– Clause 6: 227 g ball test, Clause 7:2260 g ball test
GB 15763.3 Safety glazing materials in building Part 3:Laminated glass–Appendix B Drop ball impact specimen support
Apparatus:
1) 1m/3m/5m Ball Drop Impact Testing Device
2) Adsorption and release device of steel ball
3) Steel ball
4) Supporting fixture size: 350 mm*350 mm or 660 mm*660 mm
Technical Data:
Hardened steel ball:
2260g ± 20g, diameter of approximately 82mm
1040g ± 10g, diameter of approximately 63 mm
227g ± 2g, diameter of approximately 38 mm
Steel ball adsorption mode: Electrocircuit controlled electromagnet suction cup
Lifting and lowering mode of control lever: manual or automatic
Drop height of steel ball: 1m /3m/5m/12m, customizable
Supporting fixture:
Support size: 350 mm*350 mm and 660 mm*660 mm (Customized)
Frame width: 15 mm
Steel box height: 150 mm
Rubber gasket: thickness 3 mm, width 15 mm, hardness shore A50
Interposed sheet of rubber: thickness 3 mm, hardness shore A50
Applied Test Pieces Size: 300 mm*300 mm and 610 mm* 610 mm
This testing device confirms to the standards of ISO3537and GB15763.3. It is applicable for the impact performance test of the equipment enclosure. It has the advantages of accurate performance and convenient operation as well as reasonable layout. Adjusted to a certain height, the steel ball, whose weight is required, falls down to hit the testing sample. Then the tester can judge the quality of the sample according to the damage degree of the testing sample. It can be used in the fastness test of the enclosure with the material of plastic, ceramic, acryl and Glass fiber.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
BS EN 12600 Two Tyres Impactor | Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test method and classification for flat glass Technical ... |
 |
Stamping Spring leaf | Application: Instruments and MetersMaterial: Stainless Steel 304Upper spring strip: Size: 46mm*8mm Thickness: 0.4mmLower spring strip: Size: 40mm*1... |
 |
Stainless Steel Stamping Parts for Door Locks | Material: Stainless steel 304Thickness: 1.5mmSize: 230mm*38mm*6mmWeight: 70gProcess: laser cutting, bending and shaping, countersinking Laser cutt... |
 |
Fences Pipe Clamp | Function: Pipe clamp for protective fence of mechanical equipment Clamps and fixed feet for safety fences such as workshop isolation and equipment ... |
 |
Machine equipment fence | Name: Machine equipment fence, equipment safety fence, automation equipment isolation net, industrial equipment robot fence Material: Q235 Dimensio... |
Похожие товары
 |
FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter | Продавец: Phonefix | FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol... |
 |
WF-EDU-02 Motor & Propeller Test Kit | Продавец: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | Продавец: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | Продавец: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | Продавец: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
