Steel Ball Impact Tester
Steel Ball Impact Tester
Function: Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
Suitable for impact test of safety glass and tempered glass.
Related Standard:
ISO 3537 Road vehicles — Safety glazing materials — Mechanical tests– Clause 6: 227 g ball test, Clause 7:2260 g ball test
GB 15763.3 Safety glazing materials in building Part 3:Laminated glass–Appendix B Drop ball impact specimen support
Apparatus:
1) 1m/3m/5m Ball Drop Impact Testing Device
2) Adsorption and release device of steel ball
3) Steel ball
4) Supporting fixture size: 350 mm*350 mm or 660 mm*660 mm
Technical Data:
Hardened steel ball:
2260g ± 20g, diameter of approximately 82mm
1040g ± 10g, diameter of approximately 63 mm
227g ± 2g, diameter of approximately 38 mm
Steel ball adsorption mode: Electrocircuit controlled electromagnet suction cup
Lifting and lowering mode of control lever: manual or automatic
Drop height of steel ball: 1m /3m/5m/12m, customizable
Supporting fixture:
Support size: 350 mm*350 mm and 660 mm*660 mm (Customized)
Frame width: 15 mm
Steel box height: 150 mm
Rubber gasket: thickness 3 mm, width 15 mm, hardness shore A50
Interposed sheet of rubber: thickness 3 mm, hardness shore A50
Applied Test Pieces Size: 300 mm*300 mm and 610 mm* 610 mm
This testing device confirms to the standards of ISO3537and GB15763.3. It is applicable for the impact performance test of the equipment enclosure. It has the advantages of accurate performance and convenient operation as well as reasonable layout. Adjusted to a certain height, the steel ball, whose weight is required, falls down to hit the testing sample. Then the tester can judge the quality of the sample according to the damage degree of the testing sample. It can be used in the fastness test of the enclosure with the material of plastic, ceramic, acryl and Glass fiber.
在线联系供应商
Other supplier products
 |
人头模型冲击试验支架 | 汽车玻璃人头模型试验框架 安全玻璃检测设备 汽车玻璃冲击 参照标准：GB/T 5137.1-2002汽车安全要求玻璃试验方法第1部分：力学性能试验 试验目的：评价在钝物冲击下安全玻璃是否具有最低强度或粘结强度 长*宽*高 1400mm*666mm*320mm 试样尺寸：1100mm&tim... |
 |
加工定制仪器用屏蔽罩 | Hardware shield Aluminum sheet metal parts Customized processing of instrument shield Material: Aluminum plate Thickness: 1.5 mm Size: 195.5 mm*12... |
 |
Flatness Checker For Tempered Glass And Tile | Flatness Checker For Tempered Glass And Tile Function: Measurement of arcuate form and wave form of tempered glass Related Standard: 1) GB 15763.... |
 |
Safety Glass Impact Test Machine | Impact Testing Equipment Testing Machine for Mechanical Properties of Tempered Glass Shot Bag 1)Weight:45kg±0.1kg 46kg±0.1kg 2)... |
 |
Quality Control Test Equipment for Safety Glass | Function: Determining the resistance of glazing material to impact by the penetration method. Principle: The specimen is supported vertically in a... |
Same products
 |
FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter | 卖方: Phonefix | FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol... |
 |
WF-EDU-02 Motor & Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
