SK-DTL Concrete Resist Chloride Ion penetration tester

• 

Detection method: electricity
Executive Standard
Standard for test methods of long-term performance and durability of ordinary concrete（GB/T50082-2009）
The Provisional Technical conditions of Passenger special line high-performance concrete
Corrosion prevention technical specification for concrete structure of marine harbour engineering JTJ275－2000
Apparatus to determine chloride coulomb electric flus of concrete（JG/T261-2009）

Manufacturer:
Application:
Concrete reinforcement corrosion is the primary factor affecting the durability of concrete.According to statistics, the durability damage of reinforced concrete caused by corrosion accounted for more than 40% of all injuries, while the chloride ion erosion is a major incentive for reinforcement corrosion. DTL concrete chloride ion electric flux detector can be an important indicator for the durability of concrete - concrete to resist chloride ion penetration properties (density) measurements, test indicator is the six-hour power flux (Coulomb)for the concrete specimens, quickly to evaluate the concrete resistance to the chloride ion penetration ability
Product features:
1. Embedded computer control, power outages and power-down data storage, advanced technology, well-made, reliable performance, high accuracy
2. LCD display, with real-time display/print and analysis function, can be separated from Pc to use directly, to facilitate the outdoor field detection.
3. Standard RS232 serial communications with fully automatic PC connection software can output the flux test report to generate curve, and then print for analysis and archiving
4. Automatic short circuit protection to avoid equipment damage
5. Imported material fixture, high accuracy, easy and smart to use
6. Can simultaneously test two groups (6), three (9), four (12) or five (16) concrete block one time
7. With the latest smart-in-one vacuum saturated machine

Technical parameters
• Evaluation capacity: C30 ~ C50 portland cement concrete
• Working voltage: ～220VAC　60VDC
•Test channels: 6 channels, 9 channels, 12 channels, 16 channels optional
•Work environment: 0 centigrade ~ 50centigrade Humidity =< 75%
•Measurement error: <1%
Equipment specification:
Host dimension: 385*345*145(mm)
Host weight: 5kg
Host outside dimension: 530*200*420
Vacuum saturated machine weight: 32kg
Vacuum saturated machine dimension: 750*680*400(mm)
Accessories weight: 9kg
Accessories dimension: 440*350*210(mm)
Total weight: 46kg
System Configuration
Concrete Resist Chloride Ion penetration tester
specimen fixture
NJ-BSJ concrete vacuum saturated machine
Test steps:
1． Cut the concrete Standard sample into 50mm thickness test block
2． The sample will be saturated with water in the intelligent concrete vacuum saturated machine
3． After the vacuum saturated, the specimens will be installed on the fixture
4．Inject the concrete solution( NaCl (negative), NaOH (positive) )into the specimen fixed poles
5．Connect the concrete Flux detector power and the positive and negative of specimen fixture
6．Connect the test host, test software control, the test results will be obtained after 6 hours
7．Data is automatically saved and can be printed.

Другие товары поставщика

	SK-RCM Rapid Concrete chloride migration tester	Detection method: Electromigration method (RCM) Executive Standard: NT BUILD 492（Chloride Migration Coefficient from Non – Steady - State Mig...
	SK-4000 Concrete Resistivity Tester	Detection Method:Adopt Wenner sensor array (50 mm of spacing) to test concrete resistivity Test indicator: concrete resistivity Product Model:SK-40...
	Прибор для обнаружения арматурных стержней SKR51+	PurposeSKR51+ rebar Location system is used to test rebar diameter, distribution, coating thickness in concrete. Specification JGJ/T152-2008 Perfo...
	SKZY-10/20/30 anchor shank tension tester	Executive Standard GB50367-2006 Design code for strengthening concrete structure Product introduction: The instrument is suitable for testing the a...
	SKZY-50/100 anchor shank tension tester	Executive Standard GB50367-2006 Design code for strengthening concrete structure Description: The instrument is suitable for testing the anchorage ...

Похожие товары

	FNAC-28 2 IN 1 Type-C USB Tester Voltage Current Power Meter	Продавец: Phonefix	FNIRSI FNAC-28 Multifunctional 2 in 1 Type-C USB Tester Digital Voltmeter Ammeter Amperimetor Vol...
	WF-EDU-02 Motor & Propeller Test Kit	Продавец: Wing Flying Technologies Co., Ltd	WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare...
	WF-EDU-01 Motor and Propeller Test Kit	Продавец: Wing Flying Technologies Co., Ltd	WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ...
	WF-EN-50 Engine Test Bench	Продавец: Wing Flying Technologies Co., Ltd	Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ...
	WF-EN-15 Engine Test Bench	Продавец: Wing Flying Technologies Co., Ltd	WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ...