BKNET-0102 Welded Pipe Eddy Current Flaw Detector

• 

Eddy current weld testingis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless. At the same time, we need to be clear that the welded pipe is, in general, the steel pipe that we usually say, which is a welded steel pipe.

Eddy current testing of weldsis a non-destructive testing technique for detecting component defects by using the principle that the eddy current induced by the AC electromagnetic coil on the surface of the metal member encounters a defect. The oscillating current is generated in the conductive member by the excitation coil by the principle of electromagnetic induction, and the amount of change in the eddy current is measured by the detecting coil, thereby obtaining information on the component defect.

Eddy current weld inspectiontesting is a non-destructive testing technique in which an alternating current electromagnetic coil induces eddy currents on the surface of a metal member. It is suitable for the detection of defects in conductive materials, including ferromagnetic and non-ferromagnetic metal materials.

BKNET-012 NDTweld testing equipmentis used for on-line and off-line inspection of welded pipes. It has high sensitively to axial defects such as unwelded welding, dark spots and open cracks. In the production process, products are caused by welder failure. Slow and long-term injuries can be reliably detected.

BKNET-0102 Welded Pipe Eddy Current Flaw Detector performance

BKNET-0102 Welded Pipe Eddy Current Flaw Detector Features:

High precision end and end-to-tail signal removal

High precision real-time, delayed alarm output

Fast digital／analog electronic balance

Memory track delay blanking function

Non-equal amplitude phase／amplitude alarm domain

Remote automatic help system

Synchronous alarm output for internal and external clock control

As one of ultrasonic testing equipment manufacturers, we will do our best to meet all the needs of customers.

Другие товары поставщика

	GSET-551 Steel Wire Eddy Current Flaw Detector	GSET-551 Steel Wire Eddy Current Flaw Detector Brief Introduction Using the eddy current signal processing method and high-performance DSP algor...
	Eddy Current Testing Equipment	Bolt: Mechanical parts, cylindrical threaded fasteners with nuts. A type of fastener consisting of a head and a screw (a cylinder with an external ...
	Bearing Ring Crack and Hardness Combination Flaw Detector TQJC-02	During the processing of bearing rings, various defects are often generated on the surface or inside, and cracks occupy a large proportion of all d...
	BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator	Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to ...
	BKNET-0102 Welded Pipe Eddy Current Flaw Detector	Eddy current weld testingis the use of eddy current technology to test the welded pipe, this type of testing is based on the premise of lossless....

Похожие товары

	Track Feeler Gauges Joint Gap Measuring Gauge	Продавец: 834406	履带塞尺 接头间隙测量规 导轨塞尺导轨塞尺用于检查间隙优点韧性强，拆卸设计，测量准确，不易生锈 产品规格 ...
	Portable Handy Ultrasonic Flaw Detector	Продавец: 834406	CTS -1002 手持式超声波探伤仪 CTS -1002 是一款轻量级仪器，具有卓越的性能，积累了 50 年的超声波仪器制造经验。该仪器符合 EN12668-1 ： 2010 标准，...
	Hydraulic rail turnout tamping machine for Railway track maintenance railway tamping tool	Продавец: 834406	YCD-2液压道岔捣固机 YCD-2液压道岔夯实机是铁路道岔专用维修机械设备。主要用于道岔段的枕木道砟的夯实，也可以兼顾主轨床道砟的夯实作用。BENIFITS● 本机采用本...
	Petrol rail fine grinder rail profile grinding machine	Продавец: 834406	钢轨型材磨床 NGM-6.0内燃钢轨磨床，适用于磨钢轨焊缝、接缝不平整、钢轨侧肥边、钢轨表面修补焊轨43kg/m-75kg/m。它的研磨质量好，操作简单易行，上下轨道方便。它是铁路工程重修、保...
	YD-22 Hydraulic rail tamping machine for track ballast tamping work	Продавец: 834406	YD-22 轨道维护用液压捣固机 YD-22液压捣固机是一种用于铁路线路道砟夯实维修的专业机械，道岔除外。它可以在列车通行时间内运行，无需关闭部分。它配备了三种电源模式。它们是汽油、柴油和电...