Valve Tappet Eddy Current Flaw Detector QMTZET-04

• 

Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The whole system includes a main control system, charging system and mechanical transmission system. The workpiece is sent to the area to be inspected by clamping and transverse moving. The workpiece surface is scanned by a point probe, which can inspect the outer circle, bottom surface and chamfered end surface of the tappet at the same time. At the same time, the system also supports automatic charging, automatic detection and automatic sorting. It can also be connected to the production line of the factory and can be selected for off-line automatic detection and sorting.

Valve Tappet Eddy Current Flaw Detector QMTZET-04 Brief Introduction

The tappet of the valve top-mounted gas distribution mechanism is generally made into a cylinder to reduce the quality. The roller type tappet is a kind of tappet, which has the advantage of reducing the lateral force against the friction caused by the friction. This kind of tappet is complex in structure and large in mass and is generally used on large-bore diesel engines. The tappet is usually made of nickel-chromium alloy cast iron or cold-alloy alloy cast iron, and the friction surface should be ground after heat treatment. There are three types of tappets: bacteria, cartridge, and roller.

The automobile engine valve tap testing ndt is an important gasoline engine component. In the engine valve type gas distribution mechanism, it is composed of a valve group and a valve transmission group, and the tappet is a main component of the valve transmission group except for the camshaft. The valve tappet is the follower of the cam. Its function is to transmit the motion and force from the cam to the valve while also receiving the lateral force exerted by the cam and transmitting it to the cylinder head.  In the course of service, the valve tappet fails to break in advance due to quality reasons, which causes the valve guide, valve and timing chain to break and fail successively. After the engine is turned off, the engine cannot be started, which eventually causes the engine to be scrapped.

Eddy Current Testing Equipment

ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry.

Why BKN NDT Testing Equipment

The technology of BKN originated from eddy current Laboratory of Institute of Materials, Nanjing University of Technology. At present, it is a leading high-tech non destructive testing equipment suppliers in China. The company is committed to the development of eddy current, ultrasonic, magnetic flux leakage and various non-standard equipment, holding independent research and development of a number of national patents.

Другие товары поставщика

	BKNFX Pre-Multi-Frequency Eddy Current Hardness Separator	Stimulating the coil makes a magnetic induction to the tested material. The induced electromotive force received by the testing coil is related to ...
	Eddy Current Testing Equipment	ECT Eddy current testing is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals ...
	Portable Magnetic Flux Leakage Testing Equipment	Magnetic flux leakage test refers to the formation of a leakage magnetic field on the surface of a test piece after it is magnetized due to defects...
	Valve Tappet Eddy Current Flaw Detector QMTZET-04	Tappet full automatic eddy current testing system is a full automatic crack hardness sorter that integrates light, electricity and machinery. The w...
	Magnetic Flux Leakage Testing Equipment	Electromagnetic detection is a very important non-destructive testing method and is widely used. Magnetic flux leakage testing is a magnetic method...

Похожие товары

	LM-79 Moving Detector Goniophotometer (Mirror Type C)	Продавец: LISUN ELECTRONICS (SHANGHAI) CO.,LTD	Measurement:Luminous Intensity Data, Photometric Data, Luminous Intensity Distribution, Zonal Lum...
	HB Series	Продавец: Shanghai Kinglos Musical Instruments Co., Ltd.	Personalized Violin Violin with carving flower, your personalized violin. Top: spruce. Back/Side...
	Beginner Violin	Продавец: Shanghai Kinglos Musical Instruments Co., Ltd.	Good Beginner Violin Face material: Solid Spruce Back / Side: Maple Fingerboard material: ...
	Advance Series	Продавец: Shanghai Kinglos Musical Instruments Co., Ltd.	Professional Violin Professional performance violin with high cost performance. Maple texture...
	Acoustic Violin	Продавец: Shanghai Kinglos Musical Instruments Co., Ltd.	The semi acoustic violinproduced by kinglos have good quality, many varieties and complete specif...