Automobile wire corrugated pipe drag grinding machine
Applicable standards:
ISO 6722, QC/T730, JIS C 3046, JASO D 611, SAEJ1128-2005, JBT 8139,TBT 1484.1-2001 Part1, EN50305, EN50306and other standards
Main parameters:
The test stroke is greater than 10mm, the displacement of the scraping needle is 20mm+1mm, and the scraping length is 15.5±1mm
Movement frequency :50——60 cycles/min （touch screen setting）
Counter :6 bits （touch screen setting）
Test times :6 times （touch screen setting）
The minimum distance between the test points and the test point and the sample end is greater than 10mm, and the sample rotation Angle :90
Sample length: about 750mm samples are fixed together on a steel anvil.
Weight: Basic load :4N, plus :5N, 6N, 7N, 8N, 9N, 10N, 11N（weight applied to the scraper）
Function:When the needle wears through the insulation and conductor contact, the equipment will stop
The scraping needle movement according to the "U" shape, to avoid the phenomenon that the unilateral side of the sample is easy to be scratched through.
Needle diameter :0.45mm+0.01mm（spring wire）
Test temperature monitoring function:the test environment temperature is not within the range of 23 ° C+1 ° C required by the test, the testing machine can not start or run automatically stop
Control system:servo motor, touch screen +PLC（imitation Swiss imported model）
Transmission mechanism:imported double slide rail type
Equipped with plexiglass test samples to prevent ambient temperature fluctuations can be affected by the test
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Electrochemical Corrosion and Wear Testing Machine | Standard ASTM G119: A standard for evaluating synergistic corrosion-wear performance, particularly for biomedical implants in simulated body fluid... |
 |
Thermal Radiation Flooring Combustion Tester | Product Standards ISO 9239 - 1: Reaction to fire tests for floor coverings - Part 1: Determination of the burning behaviour of floor coverings usi... |
 |
Deval abrasion testing machine | Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar... |
 |
Battery Slurry Resistance Tester | Standard ASTM B193: Standard Test Method for Resistivity of Electrical Conductor Materials ISO 18516: Conductive Coatings – Measurement o... |
 |
Electrolyte wettability test system | Standard ASTM D724-98: Standard Test Method for Surface Wettability of Paper (Angle-of-Repose Method Adapted) ISO 8296: Plastics – Determ... |
Похожие товары
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Продавец: China PHONEFIX Technology Co., Ltd | Тестер SIM-карт WYLIE WL-155 используется для обнаружения цепей SIM-карт и поддерживает обнаружен... |
 |
Высокоточный датчик напряжения HCV1500 | Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd | Высокоточный датчик напряжения HCV1500 — это датчик напряжения, способный измерять постоянн... |
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
