Automobile wire corrugated pipe drag grinding machine
Applicable standards:
ISO 6722, QC/T730, JIS C 3046, JASO D 611, SAEJ1128-2005, JBT 8139,TBT 1484.1-2001 Part1, EN50305, EN50306and other standards
Main parameters:
The test stroke is greater than 10mm, the displacement of the scraping needle is 20mm+1mm, and the scraping length is 15.5±1mm
Movement frequency :50——60 cycles/min （touch screen setting）
Counter :6 bits （touch screen setting）
Test times :6 times （touch screen setting）
The minimum distance between the test points and the test point and the sample end is greater than 10mm, and the sample rotation Angle :90
Sample length: about 750mm samples are fixed together on a steel anvil.
Weight: Basic load :4N, plus :5N, 6N, 7N, 8N, 9N, 10N, 11N（weight applied to the scraper）
Function:When the needle wears through the insulation and conductor contact, the equipment will stop
The scraping needle movement according to the "U" shape, to avoid the phenomenon that the unilateral side of the sample is easy to be scratched through.
Needle diameter :0.45mm+0.01mm（spring wire）
Test temperature monitoring function:the test environment temperature is not within the range of 23 ° C+1 ° C required by the test, the testing machine can not start or run automatically stop
Control system:servo motor, touch screen +PLC（imitation Swiss imported model）
Transmission mechanism:imported double slide rail type
Equipped with plexiglass test samples to prevent ambient temperature fluctuations can be affected by the test
Send product request
Other supplier products
 |
Micro-controlled Four-ball Friction and Wear Tester | Applicable Standards： When conducting tests, the microcomputer - controlled four - ball friction testing machine needs to comply with the followin... |
 |
Crosshatch scratch tester | Crosshatch scratch tester/Scratch tester makes contacting relative motion between the scratching head and material surface for the evaluation of th... |
 |
Self-tapping Performance Tester for Metal Bone Screws | Standard ISO 6475: Implants for surgery – Wear of total hip-joint prostheses ASTM F543: Standard Specification and Test Methods for Metalli... |
 |
High Velocity Impact Testing Machine | Main Purpose To test the impact - resistance performance of glasses, goggles and face shields at a certain speed. Applicable Standards SNELL SA/... |
 |
Fully Automatic Continuous Flow Reaction Calorimeter | Standards SN/T 3078.1. NY/T 3784. GB 51283 Product Features： 1. Using the coefficient calibration method and flow - regulation calorimetry, it c... |
Same products
 |
Plastic Smoke Density Tester F313 | Seller: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Seller: China PHONEFIX Technology Co., Ltd | WYLIE WL-155 SIM Card Tester is used to detect SIM card circuits and supports dual-SIM detection ... |
 |
HCV1500 High-precision Voltage Sensor | Seller: Shenzhen Hangzhi Precision Electronics Co., Ltd | HCV1500 high-precision voltage sensor is a voltage sensor that can measure DC, AC, pulse and vari... |
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
