Automotive wire cyclic bending testing machine

• 

Standard
This testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles – Cables for conductor sets) andSAE J1128(Low-voltage battery cable specifications). By simulating repetitive bending stresses, it evaluates wire fatigue resistance under dynamic conditions, ensuring compliance with OEM specifications for in-vehicle wiring durability.

Product Advantages

1. Versatile Angle Adjustment: Swings up to 180° bi-directionally or any user-defined angle, accommodating sharp-bend (e.g., R3.75) and gradual-curve testing scenarios.
2. Triple-Station Efficiency: Three independent test channels enable parallel testing of different wire specifications, tripling throughput compared to single-station machines.
3. Precision Fatigue Analysis: ±1 cycle/min speed control and 6-digit counter ensure accurate life-cycle prediction, critical for validating warranty periods.
4. Adaptive Fixture System: Interchangeable R-angle fixtures (R3.75, R7.2, R9.6, etc.) cater to wires from thin gauge (0.5mm²) to heavy-duty cables, eliminating costly retooling.
5. Safety & Data Integrity: Automatic stop-on-break function prevents post-failure damage, while memory retention resumes testing after power interruptions.

Product Features

• Dynamic Swing Mechanism: 180° rotation with adjustable angles (1° increments) via digital control panel.
• Variable Speed Control: 10–60 cycles/minute operation with real-time speed display and over-speed protection.
• Modular Test Stations: Three channels with individual start/pause controls and LED status indicators.
• Load Configuration: Four precision weights (2.5N, 3.75N, 5N, 7.5N) for simulating varying vibration/flexure stresses.
• Diagnostic Capabilities: Built-in 24V test voltage output for continuity monitoring during bending cycles.
• Robust Construction: 50KG steel frame with vibration-damping feet ensures stable operation at maximum load.

Technical Parameters

Другие товары поставщика

	Melt Flow Rate Tester (for Melt Index Tester)	Standards： ISO 1133. ASTM D1238. GB/T 3682. JIS K7210 Main uses: The melt flow rate meter uses automatic sampling and balance weighing to determ...
	Floor castor abrasion testing machine	How it works: The chair casters that can be moved and adjusted are controlled by the floor covering castor wear resistance tester. The resilient f...
	Bentonite waterproof blanket permeability tester	Scope of application: Used to determine the permeability coefficient of bentonite waterproof blanket under specified pressure and time conditions....
	Tibial Tray Fatigue meter	YY/T 0810 (China): Specifies fatigue testing protocols for tibial trays in total knee arthroplasty, focusing on support and protection of plastic b...
	Abrasive Wear Testing Machine	Standard ASTM G65 - 04 GB/T 3960-1983 Main Purposes The wet - type rubber wheel abrasive wear testing machine is primarily employed to assess t...

Похожие товары

	Lingfeng (LF) Air-Cooled Integrated Refrigeration Chillers	Продавец: Beijing Linggong Technology Co., Ltd.	TheLingfeng(LF)Air-Cooled IntegratedRefrigerationChillersis a professional refrigeration equipmen...
	Low Temperature Chiller	Продавец: Beijing Linggong Technology Co., Ltd.	Low Temperature Chiller The conditioning deviceis specifically designed for thermal and fluid dy...
	Low-Temperature Control System	Продавец: Beijing Linggong Technology Co., Ltd.	Low-Temperature Control System The conditioning deviceis specifically designed for thermal and f...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android	Продавец: China PHONEFIX Technology Co., Ltd	Тестер SIM-карт WYLIE WL-155 используется для обнаружения цепей SIM-карт и поддерживает обнаружен...