Automotive wire cyclic bending testing machine
Standard
This testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles – Cables for conductor sets) andSAE J1128(Low-voltage battery cable specifications). By simulating repetitive bending stresses, it evaluates wire fatigue resistance under dynamic conditions, ensuring compliance with OEM specifications for in-vehicle wiring durability.
Product Advantages
- Versatile Angle Adjustment: Swings up to 180° bi-directionally or any user-defined angle, accommodating sharp-bend (e.g., R3.75) and gradual-curve testing scenarios.
- Triple-Station Efficiency: Three independent test channels enable parallel testing of different wire specifications, tripling throughput compared to single-station machines.
- Precision Fatigue Analysis: ±1 cycle/min speed control and 6-digit counter ensure accurate life-cycle prediction, critical for validating warranty periods.
- Adaptive Fixture System: Interchangeable R-angle fixtures (R3.75, R7.2, R9.6, etc.) cater to wires from thin gauge (0.5mm²) to heavy-duty cables, eliminating costly retooling.
- Safety & Data Integrity: Automatic stop-on-break function prevents post-failure damage, while memory retention resumes testing after power interruptions.
Product Features
- Dynamic Swing Mechanism: 180° rotation with adjustable angles (1° increments) via digital control panel.
- Variable Speed Control: 10–60 cycles/minute operation with real-time speed display and over-speed protection.
- Modular Test Stations: Three channels with individual start/pause controls and LED status indicators.
- Load Configuration: Four precision weights (2.5N, 3.75N, 5N, 7.5N) for simulating varying vibration/flexure stresses.
- Diagnostic Capabilities: Built-in 24V test voltage output for continuity monitoring during bending cycles.
- Robust Construction: 50KG steel frame with vibration-damping feet ensures stable operation at maximum load.
Technical Parameters
| Parameter | Specification |
|---|---|
| Swing Angle Range | 0°–180° (CW/CCW), adjustable in 1° increments |
| Operating Speed | 10–60 cycles/min (±1 cycle tolerance) |
| Cycle Counter | 1–999,999 counts (presettable with pause/resume) |
| Test Stations | 3 independent channels with quick-release fixtures |
| Applied Loads | 2.5N, 3.75N, 5N, 7.5N (interchangeable weights) |
| Fixture R-Angle Options | R3.75, R7.2, R9.6 (customizable per AWG/mm²) |
| Test Voltage | 24V DC (built-in supply) |
| Power Input | AC 220V ±10%, 50/60Hz (switchable to DC 24V/5A) |
| Machine Dimensions (W×D×H) | 600 × 450 × 750 mm |
| Net Weight | 50 kg |
Send product request
Other supplier products
 |
Safety Helmet Chin-strap Strength Tester | Standard GB/T 2812-2006: Safety Helmets GB/T 2811-2019: Head Protection – Vocabulary and Test Methods Equivalent Compliance: ISO/EN 397 (I... |
 |
Cleveland Open Cup Flash Point Test device | The Automatic Cleveland Open Cup Flash Point Analyzer is the latest addition to the Koehler Flash Tester family of products.This unit is robustly d... |
 |
Spring torsion tester | Main uses: Spring torsion testing machine is suitable for all kinds of large spring torsion Angle, torsion moment test, add the corresponding acce... |
 |
Rubber hose outer coating wear testing machine | Product Introduction: Rubber hose outer coating Wear testing machine for hydraulic hoses and other similar types of hoses with fabric or steel wir... |
 |
FPC Flex Durability Test device | Standard ASTM F392 Product features 1. the stepper motor drive, high-precision positioning, low noise, can be used for a long time 2. program-c... |
Same products
 |
Optical Brightener OB-1 (OBA 393) | Seller: Jinan Ogilvy Chemical Co., Ltd | Chemical Name: 2-[(Ethylsulfanyl)methyl]phenyl methylcarbamateC.I.: 393CAS: 1533-45-5Molucular Fo... |
 |
PH-A63 Waterproof PH/EC/Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-A63 Range PH ～14.00PH EC 0～19.99mS/c... |
|
|
PH-A6 Waterproof pH and Temperature Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-A6 Range PH ～14.00PH Temp 0～50℃ ... |
|
|
PH-A8 Waterproof Soil PH Meter | Seller: Kelilong Electron Co.,Ltd | Model PH-A8 Range PH ～14.00PH Temp 0～50℃ ... |
 |
TH021WIFI Internet of Things TEMP&HUMIDITY Controller | Seller: Kelilong Electron Co.,Ltd | Product description: The electronic thermostat can be used for a variety oftemperature control... |
