Thermal Protective Performance Tester (TPP)

• 

Standards：

BS EN ISO 6942. EN 366. EN 407. ISO 11612. ASTM F1939. ASTM F2702. NFPA 1971. NFPA 2112. GB 38543. GB/T 38306

Feature：

Industrial personal computer with analysis software is suitable for severe testing conditions.

Automatic calculation for heat transmission factor and radiant heat transfer index.

Sample holder with force applied kit is easy to operate.

Single pump for shutter movement and cooling water loop.

TPP Specifications：

• Up to 7.5 in x 7.5 in. (19 cm x19 cm) sample size

• Copper slug calorimeter sensors (ASTM or ISO)

• ± 0.75°C temperature measurement

• ± 3% radiant heat flux measurement

• Device Dimensions: 42 in. x 20 in. x 18 in. (107 cm x 51 cm x 46 cm)

• Space Requirements: 46 in. x 26 in. x 24 in. (117 cm x 67 cm x 61cm)

• Power Requirements: 208-265 VAC, 50/60Hz, Single-phase

• Maximum nominal current 20 Amps

• Compressed Air: Clean/dry air at 70-90 PSI, (145 PSI max)

• Cooling Water: Cooling water required, chiller or tap water source is acceptable

• Propane Requirement: Regulated supply at 15 PSI (minimum)

• Water-cooled radiant heat source with 9 quartz (500W) infrared lamps

• Two gas burners with flame detection auto ignition

• Mass flow controller for precise gas control

• Water-cooled protective shutter

• Pneumatic sample carriage and shutter assembly

• Integrated sensor cooling stand (air cooled)

• Emergency stop cuts gas flow, power to lamps and pneumatics

• Tinted tempered glass shield protects operator

• Software safety interlocks monitor water flow, carriage position, burner ignition

Другие товары поставщика

	UV curing light box meter	Standard ISO 10977: Adheres to industrial standards for UV curing of adhesives and coatings. ASTM E3022: Meets requirements for radiometric measu...
	Catheter bending resistance tester	Product introduction 　　The tester is composed of a programmable controller, a touch screen, a force sensor, a transmission device, an airborne ...
	Paper ring compression strength tester	Product Introduction: Intelligent cardboard edge compression strength tester, also known as computer measurement and control compression tester, c...
	Safety Helmets Acceleration Impact & Penetration Tester	Standard GB/T 2812: Safety Helmets (China National Standard) Equivalent Compliance: ISO 6220-1 (Industrial Safety Helmets – Impact Absorpti...
	Dry Sand Rubber Wheel Wear Tester	Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi...

Похожие товары

	Plasma Indicator Strips Tape	Продавец: Hopeway AMD	Plasma Indicator Strips Tape provides a convenient solution for monitoring plasma sterilization p...
	Custom Stainless Components for OEM Applications	Продавец: Yongjia County Yaokang Technology Co., Ltd.	Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
	Precision Design for Automatic Liquid Level Control	Продавец: Yongjia County Yaokang Technology Co., Ltd.	Our stainless steel float balls are designed for liquid level control applications in valves, tan...
	"China manufacturer power supply VM-5H3 for power generation	Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD	"China manufacturer power supply VM-5H3 for power generation Is to use the generator sets of prof...
	Reliable Components for Water and Industrial Systems	Продавец: Yongjia County Yaokang Technology Co., Ltd.	The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem...