Automotive Wires Flammability Tester
Compliance Standards
- FMVSS 302 (Federal Motor Vehicle Safety Standard)
- ISO 6722 (Road Vehicle Cable Flammability)
- UL 94 (Tests for Flammability of Plastic Materials)
- LV 214-2 (Mercedes-Benz Flame Retardancy Spec)
- SAE J1128 (Low Voltage Battery Cable)
Technical Parameters
| Parameter | Specification |
|---|---|
| Flame Height | 20-175mm (±1mm) |
| Flame Temp | 950°C (±10°C) |
| Burn Duration | 0-999s (±0.1s) |
| Sample Size | 356×100mm (Max) |
| Gas Type | Methane/Propane (≥98% purity) |
| Burn Rate Accuracy | ±0.1mm/s |
Key Features
- Vertical/horizontal flame chamber
- Automatic flame application/retraction
- Real-time temperature mapping
- Smoke density measurement (0-100% obscuration)
- Self-extinguishing time calculation
Test Capabilities
| Test Method | Standard | Parameters |
|---|---|---|
| Horizontal Burn | FMVSS 302 | 100mm/min flame spread |
| Vertical Burn | UL 94 V-0/V-1/V-2 | 10s flame application |
| Glow Wire | IEC 60695 | 550-960°C test temps |
Measurement System
- High-speed IR thermography (1000Hz)
- Laser smoke particle counter
| Flame ionization detector (FID) |
- Microsecond-resolution timers
Standard Configuration
- Stainless steel test chamber (500×500×500mm)
- Adjustable specimen holder
- Precision gas flow control (0-10L/min)
- FlameTest Pro analysis software
Automotive Options
- EV battery fire simulation module
- Toxic gas analyzer (HCN, CO, NOx)
- High-voltage arc tracking detector
- 3D flame propagation analysis
Safety Systems
- Automatic gas shutoff valve
- Explosion-proof fume extraction
- Emergency purge system
- Thermal overload protection
Test Protocol Example (FMVSS 302)
- Precondition sample @23°C/50% RH for 24h
- Mount specimen horizontally in holder
- Apply 38mm flame for 15s
- Measure burn rate between 25-150mm marks
-
Calculate maximum spread rate ≤100mm/min
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Building material products single combustion tester | Meet the standard: Comply with GB/T 20284 standard requirements "Building materials or products of the single combustion test" EN13823 "Monomer C... |
 |
Direcct flame impingement Tester with BS 476-12 | Introduction: The testeris designedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accu... |
 |
Rapid Crack Propagation Tester | Standard ISO 13477: Designed exclusively for determining critical pressure (Pc) and temperature (Tc) in polyethylene pressure pipes during rapid... |
 |
Carpet Flammability Tester | Standard BS 4790: Hot Metal Nut Method for Floor Covering Fabrics ISO 6925: Ambient Temperature Tablet Test for Floor Coverings BS 6307: Fire Te... |
 |
Shoelace wear tester | Main uses: Shoelace wear tester is mainly used to evaluate the durability and wear resistance of shoelaces. In the test, the LACES are usually fix... |
Похожие товары
 |
Custom Stainless Components for OEM Applications | Продавец: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid... |
 |
Precision Design for Automatic Liquid Level Control | Продавец: Yongjia County Yaokang Technology Co., Ltd. | Our stainless steel float balls are designed for liquid level control applications in valves, tan... |
 |
"China manufacturer power supply VM-5H3 for power generation | Продавец: DONGFANG YOYIK (DEYANG) ENGNIEERING CO; LTD | "China manufacturer power supply VM-5H3 for power generation Is to use the generator sets of prof... |
 |
Reliable Components for Water and Industrial Systems | Продавец: Yongjia County Yaokang Technology Co., Ltd. | The Stainless Steel Float Ball is designed for automatic liquid level control and fluid managem... |
 |
Double Convex Lenses | Продавец: Shandong Yanggu Constant Crystal Optics, Inc | Double Convex Lensesare used in image relay applications, or for imaging objects at close conjuga... |
