Car seat belt locking performance tester

• 

Applicable standards:

Automotive seat belt locking performance tester mainly meets the following national or industry standards:

GB 14166-2013Seat belts, restraint systems, Child restraint Systems and ISOFIX Child Restraint Systems for Motor Vehicle Occupants

GB 27887-2011Restraint System for Child Occupants of Motor Vehicles

Main parameters:

Control system:

PLC control system is usually used to realize automatic control and data processing.

Operation interface:

It is equipped with a color touch screen and supports switching between Chinese and English for easy operation.

Emergency lock test parameters:

After installation, the winder can reach a speed of 2.94m/s within 50ms to simulate the locking function in emergency situations.

Angle adjustment:

The installation Angle can be adjusted, such as the winding shaft to the horizontal plane of 45°, 90°, 135° and 180° to adapt to different test requirements.

Vehicle acceleration adjustment range:

The acceleration adjustment range is usually 0.2——1.5g （can be set） to meet the needs of different test conditions.

Acceleration adjustment step:

The acceleration adjustment step is usually less than or equal to 0.05g to ensure the accuracy of the test.

Maximum displacement of car feeling:

The maximum displacement of the car is usually 100mm, which is used to simulate the displacement of the vehicle during an emergency stop or collision.

Inductive acceleration adjustment range:

The inductive acceleration adjustment range is not less than 0.2——2.5g to adapt to the test needs of different seat belt materials.

Acceleration measurement accuracy:

The measurement accuracy of acceleration is usually less than 0.01g to ensure the accuracy of the test results.

Repeatability deviation of acceleration:

The repeatability deviation of acceleration is usually less than or equal to ±0.01g to ensure the stability and reliability of the test results.

Maximum overshoot of acceleration:

The maximum overshoot of the acceleration is usually less than 10% of the set acceleration value to ensure the accuracy of the test.

Seatbelt locking distance measurement accuracy:

Seat belt lock distance measurement accuracy is usually less than or equal to ±0.01mm, to ensure the accuracy of the test results.

Другие товары поставщика

	Particle Abrasion Tester	The Q-4D particle wear tester is specially designed as a standard instrument based on the national standard "Method for Determination of Wear Rate ...
	MARK II Slip Resistance Tester	Application: MARK II Slip Resistance Tester used the the principle of the ratio of load horizontal force to vertical force, test the maximum stati...
	Fiber Blend Ratio Tester	Product Introduction: It is used to measure the resistance value with a certain density under a certain geometry, and then converts it into the sp...
	Wool Shrinkage Tester	Product Introduction: 1. YM116 type wool fold shrinkage tester is a precision instrument to determine the length of the towel under the standard t...
	Carpet static charge measurement device	Test Principle When a person walks on the inspected carpet wearing the shoes specified in the standard and following the prescribed walking patter...

Похожие товары

	Optical Brightener OB-1 (OBA 393)	Продавец: Jinan Ogilvy Chemical Co., Ltd	Chemical Name: 2-[(Ethylsulfanyl)methyl]phenyl methylcarbamateC.I.: 393CAS: 1533-45-5Molucular Fo...
	PH-A63 Waterproof PH/EC/Temperature Meter	Продавец: Коллирон электроникс лимитед	Model PH-A63 Range PH ～14.00PH EC 0～19.99mS/c...
	PH-A6 Waterproof pH and Temperature Meter	Продавец: Коллирон электроникс лимитед	Model PH-A6 Range PH ～14.00PH Temp 0～50℃ ...
	PH-A8PH-A8 Waterproof Soil PH Meter Waterproof Soil PH Meter	Продавец: Коллирон электроникс лимитед	Model PH-A8 Range PH ～14.00PH Temp 0～50℃ ...
	TH021WIFI Internet of Things TEMP&HUMIDITY Controller	Продавец: Коллирон электроникс лимитед	Product description: The electronic thermostat can be used for a variety oftemperature control...