Geosynthetics Bursting Strength Tester
Scope of application:
It is used to determine the bursting strength of geotextiles, geomembranes and geocomposite materials composed of geotextiles and geomembranes. The specimen is clamped on the elastic diaphragm, the liquid pressure is applied under the diaphragm to expand the diaphragm and the specimen, and the liquid volume is increased at a constant speed until the specimen is broken, and the bursting strength and bursting degree are measured at this time. In the absence of a sample, the burst strength of the expanded film is measured when it reaches the burst height with a sample, and the difference between the two is the burst strength of the sample.
Meet the standard:
ASTM D3786-2008,SL/T ,etc
Instrument features:
Meet a variety of standard requirements of the sample and area, wide range of application;
User-friendly operation interface, touch screen control, digital display, simple and easy to operate;
Supporting professional test system to realize the simultaneous measurement of force value, displacement and time during burst;
Select high-precision sensor, the result is accurate and reliable;
Equipped with professional sample fixture, sample loading is labor-saving, convenient and reliable;
The front of the panel is equipped with an emergency stop button, easy to operate, safe and reliable;
Built-in thermal printer, timely output test results.
Technical parameters:
The test area is 7.3cm2
Pressure rate 10——150ml/min
Tensile strength measurement range and accuracy 0——6000kPa,+1%
Strength fraction 0.1kPa
Maximum bursting height and resolution 35mm,±0.1mm
Power supply AC 220V 50Hz
Overall dimensions 550x400x600mm
Standard configuration:
1. One host
2. One power cable
3. 25 pieces of rubber diaphragm
4. Glycerin 500ml
5. 2 rolls of thermal printing paper
6. 1 wrench
7. Four feet
8. Product packing list 1 copy
9. 1 copy of product manual
10. One copy of product certificate
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Battery short-circuit tester | The device is designed based on a variety of battery short-circuit test standards. According to the standard requirements, the short-circuit devic... |
 |
Wet leakage current test system of photovoltaic module | Standard IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval UL 61730: Safety Standard for Photovolta... |
 |
Dental Implants Fatigue Tester | Standard ISO 14801:2016: Specifies dynamic fatigue testing protocols for endosseous dental implants, including load ratios, frequency, and failure... |
 |
Rubber hose outer coating wear testing machine | Product Introduction: Rubber hose outer coating Wear testing machine for hydraulic hoses and other similar types of hoses with fabric or steel wir... |
 |
Building Material Noxious Gas Analysis Apparatus | Introduction Thisdevice is designed accordance to DIN53436AND .it realized smoke of burning material continuous and stable production and gas extr... |
Похожие товары
 |
Plastic Smoke Density Tester F313 | Продавец: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... |
 |
WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android | Продавец: China PHONEFIX Technology Co., Ltd | Тестер SIM-карт WYLIE WL-155 используется для обнаружения цепей SIM-карт и поддерживает обнаружен... |
 |
Высокоточный датчик напряжения HCV1500 | Продавец: Shenzhen Hangzhi Precision Electronics Co., Ltd | Высокоточный датчик напряжения HCV1500 — это датчик напряжения, способный измерять постоянн... |
 |
Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
