Geosynthetics Bursting Strength Tester
Scope of application:
It is used to determine the bursting strength of geotextiles, geomembranes and geocomposite materials composed of geotextiles and geomembranes. The specimen is clamped on the elastic diaphragm, the liquid pressure is applied under the diaphragm to expand the diaphragm and the specimen, and the liquid volume is increased at a constant speed until the specimen is broken, and the bursting strength and bursting degree are measured at this time. In the absence of a sample, the burst strength of the expanded film is measured when it reaches the burst height with a sample, and the difference between the two is the burst strength of the sample.
Meet the standard:
ASTM D3786-2008,SL/T ,etc
Instrument features:
Meet a variety of standard requirements of the sample and area, wide range of application;
User-friendly operation interface, touch screen control, digital display, simple and easy to operate;
Supporting professional test system to realize the simultaneous measurement of force value, displacement and time during burst;
Select high-precision sensor, the result is accurate and reliable;
Equipped with professional sample fixture, sample loading is labor-saving, convenient and reliable;
The front of the panel is equipped with an emergency stop button, easy to operate, safe and reliable;
Built-in thermal printer, timely output test results.
Technical parameters:
The test area is 7.3cm2
Pressure rate 10——150ml/min
Tensile strength measurement range and accuracy 0——6000kPa,+1%
Strength fraction 0.1kPa
Maximum bursting height and resolution 35mm,±0.1mm
Power supply AC 220V 50Hz
Overall dimensions 550x400x600mm
Standard configuration:
1. One host
2. One power cable
3. 25 pieces of rubber diaphragm
4. Glycerin 500ml
5. 2 rolls of thermal printing paper
6. 1 wrench
7. Four feet
8. Product packing list 1 copy
9. 1 copy of product manual
10. One copy of product certificate
Send product request
Other supplier products
 |
Coating Wear Resistance Measuring Device | Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met... |
 |
Oxidizing Solids Test device | Product Description Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 34.4.1 Test O.1: Test for ox... |
 |
Car seat fatigue tester | Applicable standards: GB/T 18941-2003"Test method of foam polymer materials for car seats" : This standard specifies the test method of foam polym... |
 |
Falling Sand Abrasion Tester | Standards GB811-2022. GB24429 GB/T 38305 GJB1564A GA/T44. GA293 GA294 GA295 GA296 ASTMD968 ASTMD333 ASTMD1395 ASTMD2205 Main applicati... |
 |
Helmet Strap Tensile Tester | Purpose Apply a certain initial load to the helmet strap system for a certain period of time. Then, let a weight of a certain mass fall from a cer... |
Same products
 |
PHS‑25C Benchtop Digital pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: Equipped with BNC‑composite electrodes and power supplies adapt... |
 |
PHS‑3C Automatic Calibration pH/Thermometer | Seller: Kelilong Electron Co.Ltd | Product Description: Equipped with BNC‑compatible combination electrodes and power s... |
 |
KL‑016 Benchtop Digital pH Meter (Backlit Display) | Seller: Kelilong Electron Co.Ltd | Product Description: This instrument features a large‑screen digital display, extern... |
 |
KL‑98 Professional Laboratory pH/ORP/Temperature Meter | Seller: Kelilong Electron Co.Ltd | Product Description: The PH‑98 Tester is an easy‑to‑operate, multi‑functional microp... |
 |
KL‑03(I) Pen‑type High‑precision pH Meter | Seller: Kelilong Electron Co.Ltd | Product Description: This instrument is available in a variety of colors. Calibratio... |
