Saddle Pins
1.Technical Parameters and DrawingsHE CodeDimensionsWt.Thread Dia.Arm SizeHeight above armkgSP11"3 3/4"×4 3/4"6"2.72SP1-3/81 3/8"3 3/4"×4 3/4"7"3.591. Tolerance: ±5% 2. All dimensions are in inch3. Material: carbon steel 4. Finish: hot dip galvanized 5. Customized sizes are available at request.2.Product Description:Saddle pins are produced for straight-line, angle or corner constructions. Because of its appearance, it is also called clamp pin. It has a forged pin body, a wide base, two carriage bolts, two square nuts, two MF cueved lock nuts, and a washer plate.The pin body and wide base saddle is welded together. Base is mounted to cross arms with the two carriage bolts, which can keep pins from slipping or twisting.Pin body is steel hot dip galvanized; with nylon alloy insulator threads. Carriage bolts: 5/8"×7" Washer plate: 5/16"×1 1/2" The above are typical only, please consult Shanghai Herrajes for further information.3.Product Details:Name: saddle pins, clamp pins, wide base saddle pinsHS code: 7326Model: ANSI/ASMEPackage: bulk packing; palletized; as requiredTrademark: HE, as requiredOrigin: ChinaRaw material: carbon steelFinish: HDGODM&OEM service: yesSample: available, FOCPayment term: T/T, 30% prepayment and 70% balance against B/LCertificate: ISODelivery time: 20-40 daysMOQ: 500kgsExport term: FOB; CIFProduction capacity pcs/day: 2000 Minimum tensile strength lbs.: Lead thread in: 1,1 3/8,etc.Height above arm in: 6, 7, etc.Carriage bolts in : 5/8×7Washer plate: 5/16×1 1/2
Другие товары поставщика
|
|
|
1.Technical Parameters and DrawingsHE CodeDimensionsDia. ΦDWt. kgABCEEBO1/2-88" (203.2)4" (101.6)1"(25.4)1 1/2" (38.1)1/2"(12.7)0.35EBO1/2-1212"(3... |
|
|
|
1.Technical ParametersNotes:1. Tolerance: ±5% 2. All dimensions are in MM except for marked. 3. Finish: hot dip galvanized per ASTM A153 4. Cust... |
|
|
|
1.Technical Parameters and DrawingsHE CodeDescriptionWt./1000kgGWT3/8Guy wire thimble 3/8"37.2Notes:1. Tolerance: ±5% 2. All dimensions are in MM ... |
|
|
|
2.Technical Parameters and DrawingsHE CodeDimensionsWt.Dia.Eye size.Length under eyeskgES3/83/8"7/8"×1 1/4"3"0.100ES1/21/2"1 1/4×1 5/8"6"0.295ES5/8... |
|
|
|
1.Technical Parameters and DrawingsHE CodeIMS-1HE CodeIMS-2HE CodeIMS-31. Tolerance: ±5% 2. All dimensions are in MM3. Material: carbon steel 4. ... |
Все товары поставщика
Похожие товары
