Battery Nail Penetration Tester丨Battery Nail Penetration Test mechine

• 

Description

The test shall be carried out at an ambient temperature of 20°C±5°C. Place the battery with a thermocouple (the contact of the thermocouple is fixed on the large surface of the battery) in a fume cupboard, and pierce the center of the largest surface of the battery with a non-corrosive rust-free steel needle of 2-8mm in diameter at the speed of 10mm/s-40mm/s and keep it in place for 5 seconds.

Standard

GB/T 18332.2-2001

MT/T 1051-2007

GB/T 31485-2015 "Safety requirements and test methods for power batteries for electric vehicles"

GB/T 31241-2014 　 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"

UN38.3 "United Nations Manual of Transport Tests and Standards for Dangerous Goods"

IEC62133 "Battery (group) composed of electric cores and safety requirements for use in portable equipment"

UL 1642:2012 "Lithium Battery Standard"

Specifications

1. ф2mm-ф8mm high-temperature resistant steel needles.

2. Distance between the tip of the needle and the lower part: 250mm from the plane where the battery is placed. 3.

3. Clamping distance: 150mm

4. 10-40mm/s speed, from the direction perpendicular to the battery pole plate through (steel needle stays in the battery)

5. penetration force: about 2000KG

6. force display: pressure sensing LED display

7. Stroke: about 200mm

8. driving mode: hydraulic drive (or motor drive)

9. made into a box-type equipment device explosion-proof, fire prevention, corrosion resistance, easy to clean.

10. explosion-proof box size (W × H × D): about 450 × 750 × 550mm

11. explosion-proof box material: galvanized sheet baking paint treatment

12. machine size: about 1640 × 570 × 730mm

13. control box size: about 300 × 260 × 170mm

14. weight: about 75KG

15. power requirements: 1 ф220V, 50HZ

Другие товары поставщика

	Hydrogen Sulfide Corrosion Test Chamber	The Hydrogen Sulfide Corrosion Test Chamber is a precision environmental testing instrument designed to evaluate the corrosion resistance of metals...
	Thermal - Cold Cycle meter	Standard BS 7291: Compliant for thermal cycling tests on thermoplastic pipe systems (1769 Series with pressure chamber). Adaptive Certification...
	Syringe piston thrust tester	Product introduction The syringe piston thrust tester is a kind of high precision and high stability measuring equipment, which is used to measure...
	In-situ expansion analysis system	The In-situ Expansion Analysis System is designed for high-precision measurement of dimensional and volumetric changes in electrochemical cells and...
	Bag lifting fatigue tester	Standard: ISO1167 ASTMD1598 ASTMD1599 Main parameters: Amplitude: 30±2mm Vibration frequency: 2——3HZ (130 times per minute) ...

Похожие товары

	WYLIE WL-155 SIM Card Tester for iPhone 14-17 Pro Max & Android	Продавец: China PHONEFIX Technology Co., Ltd	Тестер SIM-карт WYLIE WL-155 используется для обнаружения цепей SIM-карт и поддерживает обнаружен...
	Fabric Thickness Tester	Продавец: Cell Instruments Co., Ltd	Fabric Thickness Testeris used to measure the thickness of various types of textiles, such as wov...
	Mop Friction Force Tester	Продавец: Cell Instruments Co., Ltd	Mops are indispensable tools for both household and commercial cleaning, and their frictional per...
	BCT Box Compression Tester	Продавец: Cell Instruments Co., Ltd	BoxCompression testeris used for measuring the ability of packaged freights and containers, made ...
	BTT-02 Ball Tack Tester	Продавец: Cell Instruments Co., Ltd	Inclined Type Ball Tack Testeris equipped with the inclined plate of 20°, 30° or 40° ...