.

Q8A2:high sensitivity 0.1% permalloy core 10A AC current clamp CT

The model Q8A2 permalloy core ac current clamp ct with high accuracy up to 0.1% has been designed for use with energy meter tester, multimeters, recorders, power analyzers, safety testers etc. FEATURES Holding wire diameter: φ8mm; Frequency 10Hz-2MHz Bandwidth; High times harmonic measurement; Conforms to EN 61010, 600V CAT III; Measurement range of 1mA to 20A AC; Low phase shift for power measurement; Basic parameters : Ratio :1000: 1, 2000:1 or 2500:1 (customized) Accuracy class:0.1 %,0.2% Primary current:0 - 5A AC, 0 - 10A AC, 0 - 20A AC Secondary current:0 - 10mA AC or 0 - 100mV AC (customized) Output signal (AC current):From 0 to 10mA AC at nominal input current Output signal (AC voltage):From 0 to 100mV AC at nominal input current


Отправить запрос, связаться с поставщиком

Кому: 782364
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

D50: hall effect high linearity 0.1% 1000A AC/DC current clamp
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insulated BNC output cable that can accurately measure...
GF102 PORTABLE 1-PHASE POWER METER TEST BENCH
GF102 PORTABLE 1-PHASE POWER METER TEST BENCH GF102 single-phase energy meter test bench used to test the AC energy meter error. It can test 1pc or 3pcs energy meters at the same time. The accu...
Q150: split core 150mm 3000/5A current transformer clamp
Q150: split core 150mm 3000/5A current transformer clamp The model Q150 current transformer clamp can be used in large current situation and cooperate to cable fault tester and cable identification device...
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power me...
Q40:high performance 500A AC current clamp CT sensor
Q40:high performance 500A AC current clamp CT sensor The Q40 Series AC Current clamp ct sensor are high performance models, and use a custom nickel core to improve accuracy and phase shift on the low ...
Все товары поставщика

Похожие товары

D50: hall effect high linearity 0.1% 1000A AC/DC current clamp
D50: hall effect high linearity 0.1% 1000A AC/DC current clamp Продавец: 782364 The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insu...
D20: voltage output 200A AC/DC CURRENT PROBE
D20: voltage output 200A AC/DC CURRENT PROBE Продавец: 782364 The Model D20 AC/DC current clamp is a portable 100A/200Arms current probe.The D20 is power by a ...
FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator
FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator Продавец: 782364 The FQ-RCTA02 rogowski coil flexible current sensor is designed for easy installed in tight space...
FQ-RCT02:6000A flexible ROGOWSK coil current sensor
FQ-RCT02:6000A flexible ROGOWSK coil current sensor Продавец: 782364 The FQ-RCT02 flexible current sensor is an AC current sensor composed of a flexible Rogowski coil...
Q150: split core 150mm 3000/5A current transformer clamp
Q150: split core 150mm 3000/5A current transformer clamp Продавец: 782364 The model Q150 current transformer clamp can be used in large current situation and cooperate to ...