.

Q8A2:high sensitivity 0.1% permalloy core 10A AC current clamp CT

Q8A2:high sensitivity 0.1% permalloy core 10A AC current clamp CT
  • Q8A2:high sensitivity 0.1% permalloy core 10A AC current clamp CT
  • Q8A2:high sensitivity 0.1% permalloy core 10A AC current clamp CT
  • Q8A2:high sensitivity 0.1% permalloy core 10A AC current clamp CT
  • Q8A2:high sensitivity 0.1% permalloy core 10A AC current clamp CT
Produced by: 782364

All supplier products
Send product request

The model Q8A2 permalloy core ac current clamp ct with high accuracy up to 0.1% has been designed for use with energy meter tester, multimeters, recorders, power analyzers, safety testers etc. FEATURES Holding wire diameter: φ8mm; Frequency 10Hz-2MHz Bandwidth; High times harmonic measurement; Conforms to EN 61010, 600V CAT III; Measurement range of 1mA to 20A AC; Low phase shift for power measurement; Basic parameters : Ratio :1000: 1, 2000:1 or 2500:1 (customized) Accuracy class:0.1 %,0.2% Primary current:0 - 5A AC, 0 - 10A AC, 0 - 20A AC Secondary current:0 - 10mA AC or 0 - 100mV AC (customized) Output signal (AC current):From 0 to 10mA AC at nominal input current Output signal (AC voltage):From 0 to 100mV AC at nominal input current



Send product request

To: 782364
Your E-mail:
Message text:


Send to other suppliers

Other supplier products

GF102 PORTABLE 1-PHASE POWER METER TEST BENCH
 GF102 PORTABLE 1-PHASE POWER METER TEST BENCH GF102 single-phase energy meter test bench used to test the AC energy meter error. It can test 1pc or 3pcs energy meters at the same time. The accu...
Q13: MA output 100A AC clamp on current probe
 Q13: MA output 100A AC clamp on current probe The Q13 clamp on current probe is a high accuracy mini probe for measurements to 120A AC.It can output 1mA/A, 1mV/A or 10mV/A etc. The Q13 Series c...
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
 GF6018A CLAMP TYPE MULTIMETER CALIBRATOR This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power me...
P18: 200A double ratio voltage output AC current clamp
 P18: 200A double ratio voltage output AC current clamp The P18 AC current clamp is a general purpose 200A AC current clamp ct designed for use with DMMs, power loggers and energy meter calibration instr...
GF6018A CLAMP TYPE MULTIMETER CALIBRATOR
 GF6018A CLAMP TYPE MULTIMETER CALIBRATOR This GF6018A high precision multi-product calibrator is compliance with national verification regulation: JJG124-2005 "Ammeter, voltmeter, power me...
All supplier products

Same products

D50: hall effect high linearity 0.1% 1000A AC/DC current clamp
 D50: hall effect high linearity 0.1% 1000A AC/DC current clamp Seller: 782364 The Model D50 AC/DC hall effect current clamp is a portable 500A/1000Arms current probe with insu...
D20: voltage output 200A AC/DC CURRENT PROBE
 D20: voltage output 200A AC/DC CURRENT PROBE Seller: 782364 The Model D20 AC/DC current clamp is a portable 100A/200Arms current probe.The D20 is power by a ...
FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator
 FQ-RCTA02: ROGOWSKI coil 3000A flexible current sensor with integrator Seller: 782364 The FQ-RCTA02 rogowski coil flexible current sensor is designed for easy installed in tight space...
FQ-RCT02:6000A flexible ROGOWSK coil current sensor
 FQ-RCT02:6000A flexible ROGOWSK coil current sensor Seller: 782364 The FQ-RCT02 flexible current sensor is an AC current sensor composed of a flexible Rogowski coil...
Q150: split core 150mm 3000/5A current transformer clamp
 Q150: split core 150mm 3000/5A current transformer clamp Seller: 782364 The model Q150 current transformer clamp can be used in large current situation and cooperate to ...