Safety shoe impact testing machine / Safety shoes testing machine

• 

According to the criteria

Bs-953.1870

EN-344.

ANSI-Z41

CSA-Z195

ISO K88782

EN ISO 20344.

ANSI-Z41

BS EN-344

CSA-ZI95

LD50-1994

Product Features

Drop hammer mechanism capable of holding and releasing a drop hammer from a specified height.

Capability to use different standard drop hammer weights, such as 20$pm$0.2kg (for EN standards) and 22.7kg (for BS, ANSI standards).

Adjustable falling height for the drop hammer, with a range typically from 0 up to at least 1100mm (for EN standards).

System for achieving specific impact energies, such as 200 joules (for EN standards) and 100$pm$2 joules (for BS, ANSI standards), which are determined by the drop hammer weight and falling height.

Standardized impact edge on the drop hammer, with specifications varying by standard (e.g., 3$pm$0.1mm radius for EN, $phi$25.4mm for ANSI).

Anvil or baseplate on which the shoe is placed for the impact test.

Fixture or system for securely mounting the safety shoe in the correct position for the impact test.

Mechanism for measuring the residual height inside the toecap after the impact.

Electric motor (DC 1/4HP) for raising the drop hammer to the required height.

Robust and heavy construction (approximately 227kg) to ensure stability during impact.

Technical parameters

Weight of drop hammer: (EN) 20±0.2kg,(BS,ANSI)22.7kg

Falling height: (EN) 0——1100mm

Impact capacity: (EN) 200 joules, (BS, ANSI) 100±2 joules

Impact edge: (EN)3±0.1mm(R)，(ANSI)ø25.4mm

Horsepower: DC 1/4HP

Volume: 58.5×69.5×181.5cm

Weight: 227kg

Power supply: 1∮，AC220V

Другие товары поставщика

	Catheter Power Injection Flow and Pressure Tester YY 0285.1	Main Uses The catheter flow and pressure tester for power injection is an important medical device, mainly used to detect key parameters such as f...
	Clamp Force Test Machine / Clamping force measuring instrument	Applications: Clamping Force Testing Machine for packaging simulates the transportation with Schnabel car discharge the package, in the transit, t...
	Textile Point-to-Point Resistivity Tester / Textile and Apparel	Product Information: It is an essential instrument for the "Special Labor Protective Equipment Safety Certification" (LA Certification) and the "S...
	Shoelace anti-siphon tester / Shoelace anti-siphon test mechine	Product Introduction Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon water...
	Geosynthetic direct shear drawing friction tester 丨Geotextile Test Machine	The friction characteristics of the interface of sand/geotextile were determined by testing the contact surface of standard sand/geotextile. This i...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...