Safety shoe impact testing machine / Safety shoes testing machine
According to the criteria
Bs-953.1870
EN-344.
ANSI-Z41
CSA-Z195
ISO K88782
EN ISO 20344.
ANSI-Z41
BS EN-344
CSA-ZI95
LD50-1994
Product Features
Drop hammer mechanism capable of holding and releasing a drop hammer from a specified height.
Capability to use different standard drop hammer weights, such as 20$pm$0.2kg (for EN standards) and 22.7kg (for BS, ANSI standards).
Adjustable falling height for the drop hammer, with a range typically from 0 up to at least 1100mm (for EN standards).
System for achieving specific impact energies, such as 200 joules (for EN standards) and 100$pm$2 joules (for BS, ANSI standards), which are determined by the drop hammer weight and falling height.
Standardized impact edge on the drop hammer, with specifications varying by standard (e.g., 3$pm$0.1mm radius for EN, $phi$25.4mm for ANSI).
Anvil or baseplate on which the shoe is placed for the impact test.
Fixture or system for securely mounting the safety shoe in the correct position for the impact test.
Mechanism for measuring the residual height inside the toecap after the impact.
Electric motor (DC 1/4HP) for raising the drop hammer to the required height.
Robust and heavy construction (approximately 227kg) to ensure stability during impact.
Technical parameters
Weight of drop hammer: (EN) 20±0.2kg,(BS,ANSI)22.7kg
Falling height: (EN) 0——1100mm
Impact capacity: (EN) 200 joules, (BS, ANSI) 100±2 joules
Impact edge: (EN)3±0.1mm(R)，(ANSI)ø25.4mm
Horsepower: DC 1/4HP
Volume: 58.5×69.5×181.5cm
Weight: 227kg
Power supply: 1∮，AC220V
Send product request
Other supplier products
 |
Thermal stress tester / Thermal Stress Testing Machine | Summary: The quality characteristics of synthetic fibers are affected by temperature and pressure during the spinning process. By rapidly heating ... |
 |
Catheter Flexibility Tester | Compliance Standards YY/T 1554 - 2017. etc. ISO 10555 -Intravascular catheters- Sterile and single-use catheters ISO 11o70- Catheter introducers... |
 |
Foam Repeatly Compression Fatigue / Durability Tester | Product Details Place of Origin: China Brand Name: STD Certification: CE, Rosh, Calibration Model Number: STD SL-T009 ... |
 |
Moisture friction and wear testing machine / Friction Wear Test Machine | Product Introduction: The hydraulic plastic friction and wear testing machine meets the standard "GB/T3960-2016 plastic sliding friction and wear ... |
 |
Catheter Burst Pressure Tester / Catheter Burst Pressure Testing Equipment | Compliance Standards YY/T 1536 - 2017 YY 0285.1 - 2017. etc. Main Uses The catheter burst pressure tester is a key device used to evaluate cathe... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
