100-V2 steam generator tester

• 

Meet the standard:

The 100-V2 steam generator meets the requirements of Ford FLTM BI 107-05. GMW15919 and FCA LP-463PB-64-01 thermal shock test specifications.

Thermal shock test requirements:

If you are new to thermal shock testing, you may find that an overview of thermal shock testing helps you become more familiar with the various OEM thermal shock testing methods.

Product advantages:

Specifically Designed for Automotive Thermal Shock: Built to provide steam with the precise parameters required for common automotive thermal shock tests involving steam injection.

Meets Major OEM Standards: Complies with the specifications of leading automotive manufacturers like Ford, General Motors (GM), and FCA.

Produces Consistent Steam: Capable of generating consistent steam output, crucial for repeatable test results.

Controllable Steam Parameters: Provides controlled water flow rate and steam dynamic pressure as specified by the test standards.

Part of Approved System: Manufactured by a supplier recognized for automotive thermal shock test equipment, suggesting integration within systems designed to meet industry requirements.

Adjustable Burner: Features an adjustable gas/electric burner for flexible control over the steam generation process.

Product features:

Dedicated steam generator unit (Model 100-V2).

Capability to produce consistent steam output.

Adjustable gas/electric burner for heating and steam generation.

Controlled water flow rate output (2.7 ± 0.1 L/min).

Controlled nozzle steam dynamic pressure output (37.9 ± 1.9 kPa).

Designed to be used in conjunction with high temperature/high pressure steam hoses and a tubular nozzle meeting specific dimensions and material requirements.

Steam equipment:

Steam generator: Capable of producing consistent steam with an adjustable gas/electric burner. The water flow rate is 2.7 +/ -0.1 L/min, and the nozzle steam dynamic pressure is 37.9 +/ -1.9 kPa.

Hose: Can withstand high temperature/high pressure steam

Tubular nozzle: Inner diameter 12.5 +/- 0.3mm, length not less than 100mm, made of non-corrosive material

Model: STD-100-V2

Dynamic Head clamp (DHF) - Dynamic head pressure

See Figure 1-3. Must be able to measure the discharge dynamic head pressure of 37.9±1.9 kPa. Measuring 25 mm from the nozzle, using a 4.7 mm bore tube.

Model: STD-DHF-1

Другие товары поставщика

	Scrub Abrasion Tester | Abrasion and Washability Tester	T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests for interi...
	Gloss Meter ASTM D523	Standard The SpectroColor Pro S Series Gloss Meter adheres to stringent automotive interior quality control standards, includingISO 2813. ASTM D52...
	Universal finger friction tester	Brief Introduction The main working principles of this device is through a test head, plus a certain amount of pressure, and carry a variety of ...
	Automotive Wires Ozone Aging Chamber	Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive a...
	EN sole bending tester SATRA TM161	Product Introduction: The EN sole bending tester is used for 90 degree bending test of the sole of rubber, EVA and other zigzag shoes to detect it...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...