Solar Radiation Meters / Solar Radiation Sensors

• 

Product Introduction:

The purpose of this instrument is to measure the temperature change of the sample with radiant heat.

Arrange the sample and its reference material on the sample table, install it on the measuring table at an Angle of 45°, set a heating plate parallel to the measuring table, measure the surface temperature of the two samples with a radiation thermometer, etc., and measure by regression extrapolation method.

Standard:

ISO 9060:2018

ISO 9060

ISO 17025

Product Features:

Sample table or holder designed to accommodate both a test sample and a reference material of a specific size (10 cm x 7 cm).

Mounting system for the sample table positioned at a 45° angle relative to the radiant heat source. The table is likely painted black (as indicated by "black painting" for the measuring table Angle) to standardize its thermal properties.

Parallel heating plate made of aluminum black plate, serving as the controlled radiant heat source.

Heater with a controlled operating temperature (90℃) managed by PID control for stability.

Fixed spacing between the sample station (measuring table) and the heater (15cm).

Requires an external radiation thermometer or thermal imaging system (as noted in the "Attention" section) to measure the surface temperature of the samples non-contact.

Designed to operate within a controlled measuring chamber environment with specified temperature (20$pm$1℃) and relative humidity (50$pm$10%RH).

Includes calibrated components for the measuring table and heater.

Uses a regression extrapolation method for data analysis.

Includes a heater storage box.

Specification parameters:

Model: STD-IT-PT

Sample size: 10 X 7cm

Compare sample size: 10 X 7cm

Heater: Aluminum black plate

Heater operating temperature: 90℃

Heater control mode: PID control mode

Measuring table Angle: 45 degrees (black painting)

Sample station/heater spacing: 15cm

Equipment calibration: Measuring table (including sample mounting rack and sample table)

Heater (including temperature controller)

Heater storage box

Measuring chamber conditions: 20±1℃， 50± 10%RH

Power supply: AC100V or 220v (using downlink transformer)， 50hz or 60hz

Другие товары поставщика

	Bag lifting fatigue testing machine	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk This machine is suitable for up and down vibration fatigue test of plastic handbag...
	Damp Heat Test Chamber	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Damp Heat Test Chamber is a high-precision environmental test device designed ...
	Geosynthetic acid and alkali aging tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The geosynthetic materials acid and alkali resistance aging test chamber is used f...
	Glow wire tester	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk F242 Glow-wire tester simulates thermal stress from heat sources to test circuit c...
	Battery Powder Compaction Density Measurement System	Get a quote： Whats/App: +86 181 0160 0864 Web: gellowen.co.uk The Battery Powder Compaction Density Measurement System is a precision testing sy...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...