Scratch Resistance Tester

Product Introduction:

The Scratch 5.5 Machine is a scratch and scratch test instrument for macroscopic scratches. It is a research-grade tribology instrument for polymers, coatings, films and bulk materials that explores scratches, scratches and other surface properties in a rigorous and meaningful way.

Multiple test modes:

Rise, fall and dead load scratches and scratches. Reciprocating (wear) and indentation. Multiple industry standards can be replicated, including ASTM D7027-05. ISO 19262-12. ASTM D5178. TAMU/Avery-Dennison Mar, Ford 5 Fingers, Erichsen Cross Hatch, Pencil Hardness (dead load)， Volkswagen PV3952. GM 14688-A-10N. Surface Mechanical Systems is a member of the D20 ASTM Committee and works with the PTC SCRATCH Consortium and other industry partners to help develop and promote rigorous tribology standards.

ASTM D7027-05

ISO 19252 - 12

Cross hatch: Scratched, Sir

Gloss: High gloss and matte finish

Texturing and printing surfaces

Step-up load (programmable strain rate)

Dead load: 5 fingers, cross hatch, D5178

Common industrial applications include:

Automotive, Aerospace interiors, exteriors and coatings.

Food packaging and labeling.

Aerospace wear resistance.

Scratch resistance and scratch resistance of consumer electronics products.

Home and furniture scratch resistant.

Downhole coating resistant to scratches.

Scratch resistance and wear resistance of industrial automatic production line.

Technical parameters:

1.4 axis instrument

Normal and tangential loads (up to 400N)， micron depth resolution, high resolution tangential data up to 2000 samples per second.

Normal load: 600N, accuracy 0.05%.

Normal load: 100N, 200N, accuracy 0.25%.

Depth: 50mm, accuracy: 5 microns.

Puncture test (optional)

Up to 2.000 data points per second, in place

High speed, high load

2.Scratch 5.5 machines apply real-world loads at macro speed. Up to 400mm per second at loads of up to 400n.

Speed: 1 -- 400mm /s, programmable.

Load: 1 to 400N, progressive or constant load, programmable.

3. Programmable progressive load curve

The G5.5 machine is fully programmable from 1 to 400mm /s, with loads from 0.5 to 400N (depending on configuration).Each test can be run as a progressive load, using any valid load range as a starting and ending point. You can dial specific strain rates to test specific material properties.

Другие товары поставщика

	Leather edge oil fatigue testing machine / Leather Fatigue Test Machine	Introduction: Leather edge oil is made of polyvinyl chloride and other resins, used to coat leather, recycled leather, artificial/a colored semi-l...
	Automotive Wires Ozone Aging Chamber	Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive a...
	Scrub Abrasion Tester | Abrasion and Washability Tester	T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests for interi...
	Yellowing resistance test chamber / Yellowing Resistance Chamber	Applicable standards HG/T3986. ASTM D1748. etc. Scope of application Test method for determining the yellowing resistance of light and white pro...
	Filter Membrane Pore Analysis Tester	Product Introduction: The pore size and distribution within a filter membrane dictate its filtration efficiency, flow rate, and retention capabili...

Все товары поставщика

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...