ISO 12103-2 M2 Test Dust

Product Introduction:

Particle Technology Fuel Contamination Test Dust offers a full range of fuel contamination test materials used to test the reliability of components of fuel and hydraulic oil systems in the aerospace and automotive industries. Typical mixtures of contaminants tested within the fuel system range from iron oxidation(rusting)to carbon fiber rods, graphite epoxy composites and fire extinguishing foams.

Standards:

ASTM E1226-22. IEC 60079-20-2:2022. ISO 6184-1:2023. EN 14034-4:2021. NFPA 68:2023.ISO 12103-2

Advantages:

Particle Technology UK has considerable experience in testing dust for fuel pollution to meet UK, EU, US, Japanese and international standards. The test dust can also meet Arizona dust, regardless of particle distribution and composition, to meet the specific requirements of the customer. Standard tests simulate dust from deserts to cities, from natural gas pipelines to jet fuel, and from railroads to airplanes. This allows you, as a customer, to test your product in real-life situations to highlight its advantages.

Parameters:

Maximum Explosion Pressure (Pmax): Pressure value (0-20 bar, refer to ASTM E1226)

Maximum Explosion Pressure Rise Rate (dP/dt)max): Rate value (0-1000 bar/s)

Explosion Index (Kst): Classification value (St0-St3) )

Concentration Limits:

Minimum Explosive Concentration (MEC): Concentration values (10-500 g/m³, refer to GB/T 16425)

Maximum Explosive Concentration (MOC): Concentration values (500-5000 g/m³)

Critical Dilution Concentration: Inert Addition Amount (≥ 50 vol%)

Particle Size Distribution:

Mean Particle Size (D50): Size Range (1-500 μm)

Distribution Width (Span): Value (≤ 2.0)

Fine Powder Content: Percentage (<75 μm, ≥ 20%)

Humidity Effect:

Critical Humidity Point: Relative Humidity (≥60%)

Moisture Content Impact: Moisture Content (≤5wt%)

Dry Dust Ignition Delay: Time Value (<10ms)

Oxygen Content Correlation:

Minimum Oxygen Concentration (MOC): Oxygen Content (≤12vol%)

Oxygen Limiting Index: Value (≥0.21)

Inerting Concentration: Inert Gas Proportion (≥30vol%)

Dust Layer Characteristics:

Layer Thickness Ignition Temperature: Temperature Threshold (≥300°C)

Bulk Density: Value (0.2-1.5g/cm³)

Autoignition Propensity: Time Delay (≤60min)

Dispersion Performance:

Dust Cloud Formation Efficiency: Dispersion Factor (≥0.8)

Suspension Time: Duration (≥5s)

Settling Rate: Velocity (0.1-10cm/s)

Electrostatic Parameters:

Dust Resistivity: Value (10^6-10^12Ω·cm)

Charge Decay Time: Time (≤10s)

Electrostatic Spark Energy: Energy Threshold (≤30mJ)

Chemical Composition:

Volatile Matter: Percentage (≥10wt%)

Ash Impact: Ash Content (≤20wt%)

Combustible Material Ratio: Value (≥70%)

Другие товары поставщика

	Automatic Down Filling Tester / Down and Feather Testing Machine	Introduction The loftiness index is one of the important indicators of feather and down quality. It is a concentrated manifestation of the interna...
	European standard shrinkage testing machine | European Standard Washer	Product Overview TheEuropean Standard Washer(EN 14399-compliant) is a high-performance fastening component designed for industrial and automotive ...
	Xenon Test Chamber/weather ometer	IntroductionWeather-Ometer and Fade-Ometer tester adopts water-cooled xenon lamp. This instrument using argon arc lamp simulation control ideal nat...
	Film impact tester ISO 6272	Product Introduction The film impact testing machine, through the hemispherical punch at a certain speed, impacts and passes through the film samp...
	Vacuum Blood Collection Tube Suction Volume Tester	The main uses, compliance standards, and technical parameters of the Vacuum Blood Collection Tube Aspiration Volume Tester are as follows: Complia...

Все товары поставщика

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...