ISO 12103-2 M2 Test Dust
Product Introduction:
Particle Technology Fuel Contamination Test Dust offers a full range of fuel contamination test materials used to test the reliability of components of fuel and hydraulic oil systems in the aerospace and automotive industries. Typical mixtures of contaminants tested within the fuel system range from iron oxidation(rusting)to carbon fiber rods, graphite epoxy composites and fire extinguishing foams.
Standards:
ASTM E1226-22. IEC 60079-20-2:2022. ISO 6184-1:2023. EN 14034-4:2021. NFPA 68:2023.ISO 12103-2
Advantages:
Particle Technology UK has considerable experience in testing dust for fuel pollution to meet UK, EU, US, Japanese and international standards. The test dust can also meet Arizona dust, regardless of particle distribution and composition, to meet the specific requirements of the customer. Standard tests simulate dust from deserts to cities, from natural gas pipelines to jet fuel, and from railroads to airplanes. This allows you, as a customer, to test your product in real-life situations to highlight its advantages.
Parameters:
Maximum Explosion Pressure (Pmax): Pressure value (0-20 bar, refer to ASTM E1226)
Maximum Explosion Pressure Rise Rate (dP/dt)max): Rate value (0-1000 bar/s)
Explosion Index (Kst): Classification value (St0-St3) )
Concentration Limits:
Minimum Explosive Concentration (MEC): Concentration values (10-500 g/m³, refer to GB/T 16425)
Maximum Explosive Concentration (MOC): Concentration values (500-5000 g/m³)
Critical Dilution Concentration: Inert Addition Amount (≥ 50 vol%)
Particle Size Distribution:
Mean Particle Size (D50): Size Range (1-500 μm)
Distribution Width (Span): Value (≤ 2.0)
Fine Powder Content: Percentage (<75 μm, ≥ 20%)
Humidity Effect:
Critical Humidity Point: Relative Humidity (≥60%)
Moisture Content Impact: Moisture Content (≤5wt%)
Dry Dust Ignition Delay: Time Value (<10ms)
Oxygen Content Correlation:
Minimum Oxygen Concentration (MOC): Oxygen Content (≤12vol%)
Oxygen Limiting Index: Value (≥0.21)
Inerting Concentration: Inert Gas Proportion (≥30vol%)
Dust Layer Characteristics:
Layer Thickness Ignition Temperature: Temperature Threshold (≥300°C)
Bulk Density: Value (0.2-1.5g/cm³)
Autoignition Propensity: Time Delay (≤60min)
Dispersion Performance:
Dust Cloud Formation Efficiency: Dispersion Factor (≥0.8)
Suspension Time: Duration (≥5s)
Settling Rate: Velocity (0.1-10cm/s)
Electrostatic Parameters:
Dust Resistivity: Value (10^6-10^12Ω·cm)
Charge Decay Time: Time (≤10s)
Electrostatic Spark Energy: Energy Threshold (≤30mJ)
Chemical Composition:
Volatile Matter: Percentage (≥10wt%)
Ash Impact: Ash Content (≤20wt%)
Combustible Material Ratio: Value (≥70%)
Send product request
Other supplier products
 |
Spray Rating Tester | Textile Testing Products | Standards: ISO 4920. BS EN 24920. BS 3702. GB/T 4745. AATCC 22. M&S P23. NEXT 23 Applications: Spray Rating Tester is used to determine the ... |
 |
Catheter Flexibility Tester | Compliance Standards YY/T 1554 - 2017. etc. ISO 10555 -Intravascular catheters- Sterile and single-use catheters ISO 11o70- Catheter introducers... |
 |
Bag lifting fatigue testing machine / Bag Fatigue Testing Machine | Product Introduction: This machine is suitable for up and down vibration fatigue test of plastic handbag, garbage vest bag, kraft paper bag, woven... |
 |
Qinsun UV-master | In response to the climate resistance testing requirements for outdoor textiles, this equipment can simulate outdoor climate conditions and accel... |
 |
Qinsun 440 | Standard The Qinsun 440 is engineered to meet stringent international testing standards, including ASTM G155, ISO 105 B02, SAE J2412, and IEC 68... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
