Automatic thermal deformation Vica softening point tester

• 

Product Introduction:

1. Name: Thermal deformation, Vica softening point temperature tester

2. Model :STD-G-1

3. Product introduction: thermal deformation, VICa softening point temperature tester is suitable for non-metallic materials, polymer materials and thermoplastics and thermoplastic pipe fittings thermal deformation, VICa softening point temperature measurement, is the use of the latest international standards and national standards designed and manufactured non-metallic material testing instrument, The testing machine is widely used in chemical industry, scientific research units, colleges and universities, quality inspection departments, but also as a professional production unit ideal test and inspection equipment.

Standard:

GB/T 1633、GB/T 8802、GB/T 1634、ISO 2507、ISO 75、ISO 306、ASTMD 1525.ASTMD 648and so on.

Technical parameters:

1. Temperature control range: ambient temperature ——300 ° C

2. The heating rate: 120 + 10 C/h (12 + 1 ° 6 ℃ / min) or 50 + 5 'C/h (5 + 0.5 ° 6 ℃ / min)

3. Maximum temperature error :±0.5 ° C

4. Deformation measurement method: displacement sensor (accuracy 0.001mm)

5. Deformation measuring range :0mm——2.5mm

6. Maximum deformation error :±0.001mm

7. Number of sample racks: three sets of three temperatures

8. Heating medium: dimethyl silicone oil (buyer's own, physical requirements: flash point above 300℃， viscosity above 200 cess)

9. Heating power :4KW

10. Cooling method: natural cooling above 150'C, natural cooling below 150 "C or water cooling

11. With the protection function of the upper limit temperature arbitrarily set (ambient temperature ——300℃) or the protection of the upper limit of 300℃

12. Control mode :PLC control

13. Working mode of sample rack: automatic lifting

14. Sample support span :64mm/100mm

15. Mixing mode: double motor undamped high-speed mixing, smooth and uniform

16. Maximum test load :50N(5000g)

17. Power supply :AC220V+10%, 50Hz

Другие товары поставщика

	Water bath indentation hardness tester / Indentation Resistance Tester	Product Introduction: Water bath indentation hardness tester is used to determine the indentation hardness of extruded polyethylene anticorrosive ...
	Shoe Shank Stiffness Tester SATRA TM256	Standard SATRA TM256: Flexural and torsional stiffness testing for athletic, safety, and casual footwear. SATRA TM194: Dynamic fatigue resistance...
	Universal finger friction tester	Brief Introduction The main working principles of this device is through a test head, plus a certain amount of pressure, and carry a variety of ...
	Geotextile Dynamic Puncture Tester ISO 13433	Scope of application: It is used to test the penetration ability of various geomaterials to resist steel cones falling from a fixed height, so as ...
	Moisture friction and wear testing machine / Friction Wear Test Machine	Product Introduction: The hydraulic plastic friction and wear testing machine meets the standard "GB/T3960-2016 plastic sliding friction and wear ...

Похожие товары

	Bottle Wall and Bottom Thickness Tester	Продавец: Standard Group (Hong Kong) Limited	The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha...
	Pinhole Tester / Pinhole Testing Equipment	Продавец: Standard Group (Hong Kong) Limited	The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ...
	Cork Puncture and Chip Detection Instrument	Продавец: Standard Group (Hong Kong) Limited	The rubber stopper puncture debris detector is a device specifically used to detect the number of...
	Aluminum Ointment Tube Toughness Tester	Продавец: Standard Group (Hong Kong) Limited	The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind...
	Vacuum leak tester / Vacuum leak instrument	Продавец: Standard Group (Hong Kong) Limited	Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott...