Automatic thermal deformation Vica softening point tester
Product Introduction:
1. Name: Thermal deformation, Vica softening point temperature tester
2. Model :STD-G-1
3. Product introduction: thermal deformation, VICa softening point temperature tester is suitable for non-metallic materials, polymer materials and thermoplastics and thermoplastic pipe fittings thermal deformation, VICa softening point temperature measurement, is the use of the latest international standards and national standards designed and manufactured non-metallic material testing instrument, The testing machine is widely used in chemical industry, scientific research units, colleges and universities, quality inspection departments, but also as a professional production unit ideal test and inspection equipment.
Standard:
GB/T 1633、GB/T 8802、GB/T 1634、ISO 2507、ISO 75、ISO 306、ASTMD 1525.ASTMD 648and so on.
Technical parameters:
1. Temperature control range: ambient temperature ——300 ° C
2. The heating rate: 120 + 10 C/h (12 + 1 ° 6 ℃ / min) or 50 + 5 'C/h (5 + 0.5 ° 6 ℃ / min)
3. Maximum temperature error :±0.5 ° C
4. Deformation measurement method: displacement sensor (accuracy 0.001mm)
5. Deformation measuring range :0mm——2.5mm
6. Maximum deformation error :±0.001mm
7. Number of sample racks: three sets of three temperatures
8. Heating medium: dimethyl silicone oil (buyer's own, physical requirements: flash point above 300℃， viscosity above 200 cess)
9. Heating power :4KW
10. Cooling method: natural cooling above 150'C, natural cooling below 150 "C or water cooling
11. With the protection function of the upper limit temperature arbitrarily set (ambient temperature ——300℃) or the protection of the upper limit of 300℃
12. Control mode :PLC control
13. Working mode of sample rack: automatic lifting
14. Sample support span :64mm/100mm
15. Mixing mode: double motor undamped high-speed mixing, smooth and uniform
16. Maximum test load :50N(5000g)
17. Power supply :AC220V+10%, 50Hz
Send product request
Other supplier products
 |
Automotive Wires Ozone Aging Chamber | Standards ISO 6722: Road vehicles – Electrical cables – Dimensions and test methods. SAE J1128: Low-voltage cables for automotive a... |
 |
Leather Shoe Hook Core Longitudinal Bending Stiffness Tester | Standard： JBS-5131 / 4.18. QB / T1812. T1813 Application: Shanks Longitidinal Stiffness Tester determines the stiffness in the longitudinal dire... |
 |
Thin Film Pendulum Impact Tester / ASTM D | Compliance Standards GB/T 8809 ASTM D3420 Main Uses The film pendulum impact tester is mainly used to determine the resistance to pendulum impac... |
 |
Shoelace anti-siphon tester 丨Shoelace Tester | Product Introduction Shoelace anti-siphon tester is suitable for all kinds of waterproof leather, leather, mesh, waterproof shoelace, ribbon water... |
 |
Carbon black content measuring machine丨Carbon Black Content Tester | Scope of application: Used to determine the carbon black content of rubber, polyolefin plastics, polyolefin pipes and fittings, and raw materials ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
