Luggage rod reciprocating fatigue testing machine / Luggage Fatigue Tester
Product Introduction:
Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stretched to test the gap generated by the tie rod, loosening, connecting rod failure, deformation, etc.
Design criteria:
QB/T 2919-2010
Theory：
luggage trolley handle reciprocating fatigue testing machine -- Under certain pulling and pressing frequency, To check the reciprocating fatigue performance of the pull rod, rod structure of fastness and durability of the switch through the luggage lever lock with a pull rod is continuously pulling switch, reciprocating and pressing.
Usage：
Leather suitcase trolley reciprocating fatigue testing machine is used to test fatigue of the reciprocating rod for the luggage. During the test, the rod would be stretched and then test whether there will be backlash, loose, connecting problems and transformation of the rod.
Technical parameters:
Test travel 20——100cm, adjustable
Maximum drawing speed 0——10 cm/sec, adjustable
Maximum compression speed 0——10 cm/sec, adjustable
Test times 0——999999 times automatic stop
Test the power cylinder
Sensing position Four-point sensing position
The maximum height of the specimen is 100cm
Auxiliary equipment case fixing clamp
Use pressure 5——8kg/cm2
Machine size 80X90X180cm (WXDXH)
The weight is about 120kg
Use power supply AC220V, 50/60Hz, 5A
Include 1-6 specified parts:
1、Sample clamp holder: adjust the test size
2、pull rod holder
3、Rod movement device: do reciprocating motion ,and the speed and travel can be adjustable
4、support frame：the height is not less than 1500 mm, Install pulling, pressing travel guide
5、pull rod lock switch gear
6、counter：count the movement times
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Plastic Smoke Density Tester ISO 5659 | Standards: GB/T8323.2-2008: Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test ISO 5659-1: Plastics -... |
 |
Catheter Leakage and Compliance Tester | Standards YY/T, etc. Main Uses The catheter leakage and compliance tester is mainly used to detect the leakage and compliance of medical cathete... |
 |
Flatbed Ironing Tester | Textile Testing Equipment | Product Overview TheFlatbed Ironing Testeris a precision instrument designed to evaluate fabric performance under simulated ironing conditions. It... |
 |
Suture Needle Cutting Force Tester YY 0166 | The Cutting Force Tester for Suture Needles is a precision instrument specifically used to detect the force required by medical suture needles duri... |
 |
Film Heat Shrinkage Tester ASTM D2732 | The film heat shrinkage rate tester is a device specifically designed to measure the shrinkage performance of film materials under heating conditio... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
