Luggage rod reciprocating fatigue testing machine / Luggage Fatigue Tester
Product Introduction:
Luggage rod reciprocating testing machine for luggage rod reciprocating fatigue test. In the test, the specimen will be stretched to test the gap generated by the tie rod, loosening, connecting rod failure, deformation, etc.
Design criteria:
QB/T 2919-2010
Theory：
luggage trolley handle reciprocating fatigue testing machine -- Under certain pulling and pressing frequency, To check the reciprocating fatigue performance of the pull rod, rod structure of fastness and durability of the switch through the luggage lever lock with a pull rod is continuously pulling switch, reciprocating and pressing.
Usage：
Leather suitcase trolley reciprocating fatigue testing machine is used to test fatigue of the reciprocating rod for the luggage. During the test, the rod would be stretched and then test whether there will be backlash, loose, connecting problems and transformation of the rod.
Technical parameters:
Test travel 20——100cm, adjustable
Maximum drawing speed 0——10 cm/sec, adjustable
Maximum compression speed 0——10 cm/sec, adjustable
Test times 0——999999 times automatic stop
Test the power cylinder
Sensing position Four-point sensing position
The maximum height of the specimen is 100cm
Auxiliary equipment case fixing clamp
Use pressure 5——8kg/cm2
Machine size 80X90X180cm (WXDXH)
The weight is about 120kg
Use power supply AC220V, 50/60Hz, 5A
Include 1-6 specified parts:
1、Sample clamp holder: adjust the test size
2、pull rod holder
3、Rod movement device: do reciprocating motion ,and the speed and travel can be adjustable
4、support frame：the height is not less than 1500 mm, Install pulling, pressing travel guide
5、pull rod lock switch gear
6、counter：count the movement times
Send product request
Other supplier products
 |
Catheter Power Injection Flow and Pressure Tester YY 0285.1 | Main Uses The catheter flow and pressure tester for power injection is an important medical device, mainly used to detect key parameters such as f... |
 |
Snap Button Tester | Button Impact Tester | Standards: ASTM D5171: Test Method for Abrasion Resistance of Inks and Coatings (referenced for impact-related durability assessments). Applicati... |
 |
Safety Helmet Flammability Tester / Flammability test equipment | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retardant performance test, high degree of automation, ea... |
 |
G238BB Electronic Crockmeter / Electronic rubbing colour fastness tester | G238BB Electronic Crockmeteris used for testing the color fastness of fabric and leather by dry/wet rubbing.The tester makes the sample repeatedly ... |
 |
Catheter Flow Meter / Catheter Flow Equipment | Standards GB/T 15812.1 - 2005 Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods YY 0285.1 - 2017 Disposable Steri... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
