Catheter Residual Vacuum Tester YY/T 0339
Compliance Standards
YY/T 0339 - 2019 Suction Catheters for the Respiratory Tract, etc.
Main Uses
The catheter residual vacuum tester is mainly used to determine the physical properties of residual vacuum and leakage in suction catheters for the respiratory tract and other similar medical devices.
It is one of the important means to evaluate the performance of medical devices such as suction catheters for the respiratory tract, ensuring the safety and effectiveness of these devices during use.
By testing the residual vacuum of catheters, the effectiveness of the vacuum control device at the machine end in releasing vacuum can be verified, thus ensuring that respiratory catheters can meet specific performance requirements during use.
In addition, this tester can also be used for detecting vacuum leakage in catheter systems of medical devices such as hemodialysis machines, intravenous infusion devices, and ventilators, to promptly identify and resolve leakage issues and avoid medical accidents caused by leakage.
Technical Parameters
Flowmeter:
Measurement Range: Usually, it can measure 30L/min or more. Accuracy: ±5% or higher. Airflow Resistance at a Specific Flow Rate (e.g., 30L/min): It should be less than 0.1kPa.
Manometer:
Measurement Range: Usually covers ±1kPa or a larger range. Accuracy: Usually within ±0.01kPa (0.1cmH2O). Vacuum Pump: It is used to create a vacuum environment inside the catheter, and its performance should be stable and reliable.
Control Device: It is used to control the operation of the tester and the setting of test parameters, and should have an intuitive and easy - to - use operation interface.
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
Schopper Abrasion Tester | Standards DIN 53863. Part 2: Abrasion test methods for textile fabrics (rotary abrasion test). GME Standard 60345 & GMW Standard 3283: Indust... |
 |
AATCC Gray Scale for Color Change | Applicable Standards The AATCC Gray Scale aligns with international colorfastness evaluation protocols, including: AATCC Evaluation Procedure... |
 |
Catheter Vacuum Leak Tester | Standards GB 15812.1 - 2005 Non - Vascular Intravascular Catheters - Part 1: General Performance Test Methods GB 8368 Disposable Infusion SetsYY ... |
 |
Scrub Abrasion Tester | Abrasion and Washability Tester | T107 Scrubbing Tester, It is suitable for various abrasion and wet scrubbing tests, which is commonly used in scrubbing resistance tests for interi... |
 |
Large diameter blasting test machine ISO 1167 | Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable... |
Похожие товары
 |
Bottle Wall and Bottom Thickness Tester | Продавец: Standard Group (Hong Kong) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Продавец: Standard Group (Hong Kong) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Продавец: Standard Group (Hong Kong) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Продавец: Standard Group (Hong Kong) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Продавец: Standard Group (Hong Kong) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
