Catheter Residual Vacuum Tester YY/T 0339
Compliance Standards
YY/T 0339 - 2019 Suction Catheters for the Respiratory Tract, etc.
Main Uses
The catheter residual vacuum tester is mainly used to determine the physical properties of residual vacuum and leakage in suction catheters for the respiratory tract and other similar medical devices.
It is one of the important means to evaluate the performance of medical devices such as suction catheters for the respiratory tract, ensuring the safety and effectiveness of these devices during use.
By testing the residual vacuum of catheters, the effectiveness of the vacuum control device at the machine end in releasing vacuum can be verified, thus ensuring that respiratory catheters can meet specific performance requirements during use.
In addition, this tester can also be used for detecting vacuum leakage in catheter systems of medical devices such as hemodialysis machines, intravenous infusion devices, and ventilators, to promptly identify and resolve leakage issues and avoid medical accidents caused by leakage.
Technical Parameters
Flowmeter:
Measurement Range: Usually, it can measure 30L/min or more. Accuracy: ±5% or higher. Airflow Resistance at a Specific Flow Rate (e.g., 30L/min): It should be less than 0.1kPa.
Manometer:
Measurement Range: Usually covers ±1kPa or a larger range. Accuracy: Usually within ±0.01kPa (0.1cmH2O). Vacuum Pump: It is used to create a vacuum environment inside the catheter, and its performance should be stable and reliable.
Control Device: It is used to control the operation of the tester and the setting of test parameters, and should have an intuitive and easy - to - use operation interface.
Send product request
Other supplier products
 |
Qinsun Xenotest 220 | Standards ISO 105-B02: Lightfastness testing for colored textiles. AATCC TM16 (Option 3): Accelerated weathering for textiles under controlle... |
 |
ISO 12103-2 M2 Test Dust | Product Introduction: Particle Technology Fuel Contamination Test Dust offers a full range of fuel contamination test materials used to test the r... |
 |
Bag Plastic Buckle Durability Tester - Standard | Product Introduction: It is mainly used to test the service life of plastic plug-ins in luggage accessories. Technical standard: QBT 5247-2018 ... |
 |
Dry heat shrinkage tester / Heat Shrinkage Testing Equipment | Meet the standard GB/T9101-5.4-2017.GB/T9102-6.8-2016.GB/T19390-7.4.1-2023.ASTM D4974-2002. etc Scope of application It is used to test the dry ... |
 |
Flex Durability Tester ASTM | The rubbing resistance tester is a device specifically used to detect the rubbing resistance performance of materials. The following is a detailed ... |
Same products
 |
Bottle Wall and Bottom Thickness Tester | Seller: Standard International Group (HK) Limited | The wall and bottom thickness tester for bottles is a measuring instrument widely used in the pha... |
 |
Pinhole Tester / Pinhole Testing Equipment | Seller: Standard International Group (HK) Limited | The pinhole tester for aluminum foil is a device specifically used to detect micro - pinholes in ... |
 |
Cork Puncture and Chip Detection Instrument | Seller: Standard International Group (HK) Limited | The rubber stopper puncture debris detector is a device specifically used to detect the number of... |
 |
Aluminum Ointment Tube Toughness Tester | Seller: Standard International Group (HK) Limited | The ductility tester for aluminum tubes is a device specifically used to detect the ductility ind... |
 |
Vacuum leak tester / Vacuum leak instrument | Seller: Standard International Group (HK) Limited | Vacuum Decay Leak Tester specializes in the detection of leaks in ampoules, vials, injection bott... |
