FST200-201A Auto-heated Wind Speed Sensor

Introduction

F200-201 wind speed sensor is a high-reliability, high-performance wind measurement sensors, It iswith heated de-icing capability. The relationship between electrical signal and the environmental wind speed output is linear,

It is built-in strong anti-radio, anti-electromagnetic interference and anti-lightning surge protection circuitrycircuit.

It is applied to test wind speed in aerialworkplatform,engineering machinery, port machinery and other and other industry. It adaptsto harsh and low temperature environment .The main structure is made of alloy material and is surface treatedwith good waterproof, anti-corrosioncapability. Itsinternal and rotating components are sealed designthat can effectively prevent water, salt spray and dust and other intrusion.

Product Features

◇ Non-contact magnetic sensor measuring principle, high accuracy and reliability;

◇ strong wind resistance, strong corrosion resistance;

◇ Widewind speed measurement range, with low startingwind speed;

◇ Compact design, automatic heating , low temperature defrosting;

◇ Sensor circuit protection withfault-tolerant capability;

◇ Meet CE EMC standard, multi-levels for anti-lightning anti-surge design

Application Fields

◇wind speed monitoring in frigid,highmoisture, easy to freezefactories, power plants, ports, mines,

◇wind speed monitoring in wind turbines, large machinery and equipment

Main Technical Parameters

Project	Parameters
Technical Index	Supply Voltage	12~30VDC	12~30VDC	15~30VDC	5VDC or 24VDC
	Signal output	4~20mA	0~5V	0~10V	Pulse output
	Start wind speed	≤0.5m/s		Testing range
	Accuracy	±0.5m/s （＜5m/s） ±3 %FS（≥5m/s）		Anti-Wind strength	>70m/s
	Surge protection	EMC III级		Protection rate	IP55
	Working temperature	-40℃~+85℃		Electrostatic protection	15KV
	Heat ways	PTCAuto-heated		Humidity	0%~95%(Non-condensing）
	Heat power	DC24V		Wind cup material	Stainless steel 304
	Heat Power	＜50W		Main	Aluminum / polyester coating

Dimensions 外形尺寸

Electrical connection and wiring电气接口和接线

M12connector	Signal output		Wiring method
	current/voltage/pulse （optional）	1	+Vcc(positive power )	Brown
		2	+Signal out	White
		3	GND（negative power）	Blue
		4	Heat24V+(Heating positive power)	Black
		5	Heat24V-(Heating negative power)	Gray

Installation Instructions

◇The sensor is installed horizontally as shown in the figure, and the angle between the mounting base and the horizontal plane should not exceed 5° so as to ensure that the wind speed can be measured accurately by the sensor under low wind speed conditions.

◇The positions and shapes of the wind cup and the windmill arm can directly affect the accuracy of the sensor as shown in the above figure. Do not hold the wind cup and the windmill arm during installation, so as to avoid the damage to the sensor structure and the influence on the accuracy of measurement.

Другие товары поставщика

	FST600-203 K type pt100/ pt1000 Temperature Transmitter	Features Easytoinstall,severaloptionaltestingrange Dualuseforgasandliquid,usedtovariousmaterialcompatiblewith316Lstainlesssteel Severaloptiona...
	FST500-202 final manufacturer Easily setting electrical pressure switch for water pump	Product Introduction The FST500-202 Electronic Pressure Switch Can provide a continuous pressure monitoring and set the pressure switching point w...
	FST800-220 Industrial Pressure Sensor with 2088 Shell LED displayer	Product introduction The FST800-220 industrial pressure transmitter is sealed with the standard 2088 shell and is a silicon MEMS strain gauge se...
	FST800-502A Economical Pressure Sensor for Air Compressor	ProductIntroduction TheFST800-502Apressuretransmitterappliedintherefrigeration&compressorindustryisasiliconMEMSstraingaugesensorwhichisglassbo...
	FST200-211 Digital Wind Speed Alarm Controller, wind speed instrument	Features Adjustablebuttonsonpanel,easytosetinthefiled ProtectioncircuitforstrongantiRFI&EMI Contactcapacity:1-2setRelaycontactoutput,10A...

Все товары поставщика

Похожие товары

	Temperature Transmitter	Продавец: Beijing Gallop High& New Tech Co.,Ltd	Temperature transmitteradopts thermonuclear, RTD as temperature measuring element, the output sig...
	Capsule Type Pressure Transmitter	Продавец: Beijing Gallop High& New Tech Co.,Ltd	To convert measured pressure values into standard industrial signals, such as 4-20mA, 0-20mA, 0-5...
	Allen-Bradley PLC Module 1769-IA16	Продавец: 840499	Allen-Bradley PLC Module 1769-IA16The Bulletin 1769 Compact I/O™ chassis-based modules can ...
	Temperature & Humidity Transmitter	Продавец: Tinko Instrument (Suzhou) Co., Ltd.	Tinko high temperature humidity transmitterare suitable for HAVC temperature and humidity measure...
	TKSD Duct Mounted Transmitter	Продавец: Tinko Instrument (Suzhou) Co., Ltd.	TKSD series temperature transmitter with displayare designed for indoor air temperature and humid...