FST200-201A Auto-heated Wind Speed Sensor
Introduction
F200-201 wind speed sensor is a high-reliability, high-performance wind measurement sensors, It iswith heated de-icing capability. The relationship between electrical signal and the environmental wind speed output is linear,
It is built-in strong anti-radio, anti-electromagnetic interference and anti-lightning surge protection circuitrycircuit.
It is applied to test wind speed in aerialworkplatform,engineering machinery, port machinery and other and other industry. It adaptsto harsh and low temperature environment .The main structure is made of alloy material and is surface treatedwith good waterproof, anti-corrosioncapability. Itsinternal and rotating components are sealed designthat can effectively prevent water, salt spray and dust and other intrusion.
Product Features
◇ Non-contact magnetic sensor measuring principle, high accuracy and reliability;
◇ strong wind resistance, strong corrosion resistance;
◇ Widewind speed measurement range, with low startingwind speed;
◇ Compact design, automatic heating , low temperature defrosting;
◇ Sensor circuit protection withfault-tolerant capability;
◇ Meet CE EMC standard, multi-levels for anti-lightning anti-surge design
Application Fields
◇wind speed monitoring in frigid,highmoisture, easy to freezefactories, power plants, ports, mines,
◇wind speed monitoring in wind turbines, large machinery and equipment
Main Technical Parameters
|
Project |
Parameters |
||||||
|
Technical Index |
Supply Voltage |
12~30VDC |
12~30VDC |
15~30VDC |
5VDC or 24VDC |
||
|
Signal output |
4~20mA |
0~5V |
0~10V |
Pulse output |
|||
|
Start wind speed |
≤0.5m/s |
Testing range |
|||||
|
Accuracy |
±0.5m/s （＜5m/s） ±3 %FS（≥5m/s） |
Anti-Wind strength |
>70m/s |
||||
|
Surge protection |
EMC III级 |
Protection rate |
IP55 |
||||
|
Working temperature |
-40℃~+85℃ |
Electrostatic protection |
15KV |
||||
|
Heat ways |
PTCAuto-heated |
Humidity |
0%~95%(Non-condensing） |
||||
|
Heat power |
DC24V |
Wind cup material |
Stainless steel 304 |
||||
|
Heat Power |
＜50W |
Main |
Aluminum / polyester coating |
||||
Dimensions 外形尺寸
Electrical connection and wiring电气接口和接线
|
M12connector |
Signal output |
Wiring method |
||
|
current/voltage/pulse （optional） |
1 |
+Vcc(positive power ) |
Brown |
|
|
2 |
+Signal out |
White |
||
|
3 |
GND（negative power） |
Blue |
||
|
4 |
Heat24V+(Heating positive power) |
Black |
||
|
5 |
Heat24V-(Heating negative power) |
Gray |
||
Installation Instructions
◇The sensor is installed horizontally as shown in the figure, and the angle between the mounting base and the horizontal plane should not exceed 5° so as to ensure that the wind speed can be measured accurately by the sensor under low wind speed conditions.
◇The positions and shapes of the wind cup and the windmill arm can directly affect the accuracy of the sensor as shown in the above figure. Do not hold the wind cup and the windmill arm during installation, so as to avoid the damage to the sensor structure and the influence on the accuracy of measurement.
Send product request
Other supplier products
 |
FST800-501A Manufacturer Economic Air conditioner refrigerant pressure sensor | ProductIntroduction TheFST800-501Apressuretransmitterappliedintherefrigeration&compressorindustryisasiliconMEMSstraingaugesensorwhichisglass... |
 |
FST200-211 Digital Wind Speed Alarm Controller, wind speed instrument | Features Adjustablebuttonsonpanel,easytosetinthefiled ProtectioncircuitforstrongantiRFI&EMI Contactcapacity:1-2setRelaycontactoutput,10A... |
 |
FST800-211B Low price 4-20mA / 0-5V Ceramic Pressure Transmitter, Ceramic Pressure Transducer / sensor | Product introduction FST800-211B Ceramic piezo-resistive pressure transmitter is a ceramic piezo-resistive pressure-sensitive core which made by... |
 |
FST800-401 MEMS pressure transducers, pressure transducers in engineering & industry | Product Introduction The FST800-401 pressure transmitter applied in the engineering machinery industry is a silicon MEMS strain gauge sensor which... |
 |
FST700-302 IP68 Capacitance Water level transmitter / water level control switch | capacitance type level switch Features strongtolerancetopollution,precisecontrol Stronginterferenceresistanceandshockresist... |
Same products
 |
Temperature Transmitter | Seller: Beijing Gallop High& New Tech Co.,Ltd | Temperature transmitteradopts thermonuclear, RTD as temperature measuring element, the output sig... |
 |
Capsule Type Pressure Transmitter | Seller: Beijing Gallop High& New Tech Co.,Ltd | To convert measured pressure values into standard industrial signals, such as 4-20mA, 0-20mA, 0-5... |
 |
Allen-Bradley PLC Module 1769-IA16 | Seller: 840499 | Allen-Bradley PLC Module 1769-IA16 The Bulletin 1769 Compact I/O™ chassis-based modules ca... |
 |
Temperature & Humidity Transmitter | Seller: Tinko Instrument (Suzhou) Co., Ltd. | Tinko high temperature humidity transmitterare suitable for HAVC temperature and humidity measure... |
 |
TKSD Duct Mounted Transmitter | Seller: Tinko Instrument (Suzhou) Co., Ltd. | TKSD series temperature transmitter with displayare designed for indoor air temperature and humid... |
