vehicle windscreen fogging tester with SAE J1756

• 

Fogging tester is professionally designed for the fogging characteristics evaluation of volatile constituents of decorating materials used in cars and aircrafts, e.g. plastic articles, polyurethane, textiles, leather, adhesives, nonwovens and thermal forming elastomers at high temperature conditions. Fogging tester also could be used for the fogging phenomenon test of high intensity discharge (HID) headlamps of cars.

Standards
DIN 75201 Determination of the fogging characteristics of trim materials in the interior of automobiles
ISO 6452 Rubber or plastics coated fabrics-determination of fogging characteristics of trim materials
in the interior of automobiles
SAE J1756 Test procedure to determine the fogging characteristics of interior automotive materials
QB/T 2728 Leather-physical and mechanical test-determination of fogging characteristics.
BS EN 14288 Leather - Physical and mechanical tests - Determination of fogging characteristics
PV 3920 Determination of fog value (F) of non-metallic interior materials
PV 3015 Non-metallic materials for interior trim-determination of condensable constituents.
ES-X83231 Standard test method-For fogging of interior materials
NES M0161 Interior materials fog test method
D45 1727 TRIM MATERIALS AND PARTS FOR INTERIOR AND PASSENGER COMPARTMENT PARTS - FOGGING - CONDENSATION
GM 9305P Determination of fogging characteristics of automotive interior trim materials
TSM 0503G Fogging test method for non-metallic materials

Features:
CONSTRUCTIVE CHARACTERISTICS:
· Internal carrying plane, in structural treated steel, anti-acid painted.
· External protection in sheet steel of proper thickness, anti-acid treated and painted with epoxy resin.
· six work places 18/8 Inox steel test room.
· 18/8 Inox steel lift able cooling system.
· Rapid clutch Agitation System.
· Armored resistances.
· Security thermostat.
· Cooling liquid and relief entry etching with rubber-carrier.
SECURITY NORMS:
· Safety Magnetic Switch.
· Digital thermos regulator and microprocessor.
· Electronic auto programmable timer
· START-STOP switches,
· Warning Lamps.
· End test buzzer hint signal

Technical Parameter：
Hot bath temperature range: room temperature ~ 150 ℃ (room temperature ~ 280 ℃ optional)
High-temperature tank temperature control accuracy: ± 0.1 ℃ (150 ℃)
Low bath temperature range: 0 ~ 100 ℃
Cold tank temperature control accuracy: ± 0.1 ℃
High temperature trough Dimensions: 670 mm (L) × 490 mm (B) × 540 mm (H)
Cryogenic tank Dimensions: 400 mm (L) × 220 mm (B) × 520 mm (H)
Temperature tank Weight: 32kg (not including the thermally conductive medium)
Cryogenic tank Weight: 15kg (not including the thermally conductive medium)
Power: AC 220V 50Hz
Weight: 50kg
Size: 500 * 650 * 600mm
Temperature stability: ± 0.1 ° C (200 ° C)
Heating power: 3KW
Cooling capacity: 500W
Data communication: multi-function remote sensor and USB port
Safety magnetic switch
Warning Light
Test completion tips

Другие товары поставщика

	Oscillatory And Wyzenbeek Abrasion Tester	Wyzenbeek Abrasion Tester, made of modern ergonomic design, is to determine the abrasion resistance of fabrics when rubbed against a standard abras...
	din abrasion resistance tester for rubber	Din Abrasion Tester is designed to determine abrasion resistance index of natural and synthetic rubber in accordance with the above principle. It c...
	Тестер огнестойкости маски	огнестойкости респиратора Машинадляиспытания медицинских масок на огнестойкостьпредназначена для определения огнестойкости медицинских масок для ли...
	Fabric Hand Touch Feel Tester softness value Test	Brief Introduction： By softness value of the test material and objective evaluation of its feeling (touch) performance for softness test fabrics, t...
	Hydrostatic head Tester	Hydrostatic Head Tester Testing Standards: GB/T 4744, AATCC 127, ERT 120-1/160-0, BS EN 20811/3321/3424, AFNOR G07-057, ISO 811, JIS L1092A, JIS L1...

Похожие товары

	BS EN 12600 Two Tyres Impactor	Продавец: Qinhuangdao Yuanchen Technology Equipment Co., Ltd.	Reference Standard: BS EN 12600:2002Glass in building – Pendulum test – Impact test m...
	Hast Pct High-Low Temperature Test Chamber with Pressure	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	HAST PCT High-low Temperature Test Chamber With Pressureis widely applied to the testing of seali...
	Programmable Hast Accelerated Aging Tester for Industry	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	HAST (Highly Accelerated Stress Test) is a type of test that is used to evaluate the reliability ...
	CE Certificated Lab Equipment Transport Vibration Tester for Un38.3 Standard	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	CE Certificated Lab Equipment Transport Vibration Tester for UN38.3 Standardis applied to test th...
	Package Large Scale Simulation Transportation Vibration Tester	Продавец: AI SI LI (Китай) Test Equipment Co., Ltd.	This machine is used to simulation testing damage between transport for various package stuff, PC...