PV Module Impact Test Equipment

• 
• 
• 
• 

PV Module Impact Test Equipment

Related Standards:

1. IEC 61730 Impactor and Impact Test Frame
2. 45 kg impactor and 1525 mm * 2480 mm impactor frame for IEC 61730

Apparatus:

1. The impactor should be a bag made of suitable material and capable of being filled to the required weight with suitable filling materials (such as steel balls or pellets).

The outside of the bag should be wrapped with tape. When filled, the size of the impact bag should be as shown in the figure below, and the weight should be 45.5 kg + 0.5 kg. The ratio of the widest diameter to the height is between 1:1,5 to 1:1,4.

2. The test frame similar to the figure below will not minimize movement and deformation during the test. The structural frame and support should be steel channels (approximately 100 mm x 200 mm or larger). The frame should be welded or bolted firmly at the corners to minimize distortion during impact. It should also be bolted to the floor to prevent movement during the impact test.

IEC 61730-2 Photovoltaic (PV) Module Safety Certification-Part 2: Test Requirements 10.21 Module Break Test MST 32

Другие товары поставщика

	Tempered Glass Impact Strength Test Equipment	Tempered Glass Impact Strength Test Equipment Function: Determination of whether the safety glazing material has a certain minimum strength and co...
	PVB Interlayer Boiling Test Device	Function: Determining the effect of exposure of safety glazing materials to temperature and humidity condition by boiling. Related Standard: ...
	Stainless Steel Stamping Parts for Door Locks	Material: Stainless steel 304Thickness: 1.5mmSize: 230mm*38mm*6mmWeight: 70gProcess: laser cutting, bending and shaping, countersinking Laser cutt...
	Test Device For The Impact Performance Of Shot Bag	Test Device For The Impact Performance Of Shot Bag Function: Determining the resistance of glazing material to impact by the penetration method. Pr...
	Pummel Machine For Adhesion	Function:Pummel test equipment for detect the adhesion of the interlayer of the laminated glass. Technical Data:Hammer head diameter: 30mmImpact D...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...