PV Module Impact Test Equipment
PV Module Impact Test Equipment
Related Standards:
- IEC 61730 Impactor and Impact Test Frame
- 45 kg impactor and 1525 mm * 2480 mm impactor frame for IEC 61730
Apparatus:
- The impactor should be a bag made of suitable material and capable of being filled to the required weight with suitable filling materials (such as steel balls or pellets).
The outside of the bag should be wrapped with tape. When filled, the size of the impact bag should be as shown in the figure below, and the weight should be 45.5 kg + 0.5 kg. The ratio of the widest diameter to the height is between 1:1,5 to 1:1,4.
- The test frame similar to the figure below will not minimize movement and deformation during the test. The structural frame and support should be steel channels (approximately 100 mm x 200 mm or larger). The frame should be welded or bolted firmly at the corners to minimize distortion during impact. It should also be bolted to the floor to prevent movement during the impact test.
IEC 61730-2 Photovoltaic (PV) Module Safety Certification-Part 2: Test Requirements 10.21 Module Break Test MST 32
在线联系供应商
Other supplier products
 |
Machine equipment fence | Name: Machine equipment fence, equipment safety fence, automation equipment isolation net, industrial equipment robot fence Material: Q235 Dimensio... |
 |
GB / T9962-1999 Shot - Bag Impact Testing Machine For Laminated Glass | GB / T9962-1999 Shot - Bag Impact Testing Machine For Laminated Glass Function: Determining the resistance of glazing material to impact by the pen... |
 |
定制工具推车 | 移动工具车 定制工具推车 金属工具箱 五金工具柜 材质：铁板：2.0mm 方管：30mm*50mm 占地尺寸：1210mm*710mm*975mm（长*宽*高） 抽屉尺寸：630mm*425mm*250mm 公差：0.5 自重：160kg 颜色：蓝色（按要求定制） 工序：落料 切割 焊接 喷涂... |
|
|
PV Module Impact Test Equipment | PV Module Impact Test Equipment Related Standards: IEC 61730 Impactor and Impact Test Frame 45 kg impactor and 1525 mm * 2480 mm impactor frame fo... |
 |
Flatness Meter(Measuring Span 500 mm) | Flatness Meter (Measuring Span 500 mm) Function:Measurement of arcuate form and wave form of tempered glass Related Standard: 1) GB 15763.2 Safety ... |
Same products
 |
WF-EDU-02 Motor & Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-02 Motor & Propeller Test Kit Product Description Motor & Propeller Test Kitsare... |
 |
WF-EDU-01 Motor and Propeller Test Kit | 卖方: Wing Flying Technologies Co., Ltd | WF-EDU-01 Motor and Propeller Test Kit Product Description Suggested Propulsion system ... |
 |
WF-EN-50 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | Suggested Engine 110cc-350cc Engine Max Hanging Type Engine 20kg ... |
 |
WF-EN-15 Engine Test Bench | 卖方: Wing Flying Technologies Co., Ltd | WF-EN-15 Engine Test Bench Product Description Suggested Engine 110cc Engine ... |
 |
BS EN 12600 双轮胎冲击体 | 卖方: 秦皇岛源辰科技设备有限公司 | 参考标准: BS EN 12600:2002建筑用玻璃。摆锤试验。平板玻璃的冲击试验方法和分类 技术数据: 1)充气轮胎冲击器: 重量:50kg±0.1 kg 胎压:0.35Mp... |
