.

Dry microbial penetration resistance tester ISO 22612 YY / T 0506.5-2009

Standards:

ISO 22612; YY / T 0506.5-2009;

Product Information:

DryMicrobial Penetration Resistance Testeris designed to determine determine the penetration resistance of material to bacterial on dry particulates at a size range of human dandruff.

The resistance to dry microbial penetration test (ISO 22612) evaluates resistance characteristics of protective equipment to dry bacteria-carrying particles.Testing is most often performed on equipment such as surgical gowns, drapes, and clean air suits when used as medical devices. This test is part of a test suite required by the EN 13795 guidance, which determines performance requirements and performance levels for gowns, drapes, and clean air suits when used as medical devices. It is also included in the test suite required by EN 14126. for personal protective equipment. Testing in compliance to EN 13795 is part of following the European Union Medical Device Directive 93/42/EEC, and is important when seeking a CE mark for products marketed in Europe.

Test principle:

When testing, the samples were seperately fixed on a container.In these containers, five containers carrying the bacillus subtilis and 1 container carrying uncontaminated talc powder used as control.Insert 1 petri dish at the bottom of each container and beneathe the bottom of the specimen.

The supporting vessel's equipment is oscillated by a gas ball type oscillator, and all of the talcum powder passing through the sample falls onto the petri dish. Remove the petri dish for culture. The experiment results were evaluated by counting the colonies.

Scope of application:

Dry microbial penetration resistance performance tester is professionaly used to determine the bacterial penetration resistance performance of materials to dry particulates in the size range of human body dandruff.Whenn testing, the samples were fixed on a container respectively.In these containers, five containers containing subtilisin talc, one container added with Not stained talcum powder was used as a control.A Petri dish was inserted at the bottom of each container at a distance from the bottom of the timer.

The equipment supporting the container is oscillated by a Gas ball oscillator, and all the talc penetrating the sample Falled on the culture dish , cultured without the culture vessel.The test results were evaluated by counting the growing colonies.

Main parameters:

Vibration form: pneumatic ball vibrator

Vibration frequency: 20800 times / min

Vibration force: 650N

Worktable size: 40cm × 40cm × 10mm

Workbench media: marble plate

Experimental container: stainless steel test container

Work stations: 6

Cabinet negative pressure range: -50 Pa ~ -200 Pa

High efficiency filter filtration efficiency: better than 99.99%

Negative pressure cabinet ventilation flow: ≥ 5m3 / min

Data storage capacity: 100.000 group

Working voltage: 220V 50HZ

Features:

Reliable design, stable test;

Front switch glass doors, easy to observe the operation of the experimental staff;

Removable bracket, height adjustable bracket;

Support, mobile dual casters;

Negative pressure experimental system, with the fan exhaust system and the introduction of high efficiency filter to ensure the safety of operators;

Embedded high - speed industrial microcomputer control;

Dedicated operating software, with software parameters calibration, fault detection automatically


Отправить запрос, связаться с поставщиком

Кому: Шанхайская компания Qianshi Precision Electromechanical Technology Co., Ltd
Ваш E-mail:
Текст письма:


Send to other suppliers

Другие товары поставщика

High - speed Pellet Impact Testing Machine for Helmet Goggles
High - speed Pellet Impact Testing Machine for Helmet Goggles High - speed Pellet Impact Testing Machine for Helmet Goggles - Flammability Testing equipment price quotation - standard Standards: SNELL SA/K...
Socks waterproof testing machine
Socks waterproof testing machine Product Information: Reference standard: HG/T 3664-2000, GB 25037-2010 and other standards Test principle: Pour air into the stocking through...
vertical flame test chamber
vertical flame test chamber Standards: ASTM D6413, CALIF TB117, DOC-FF 3/71, 16CFR Parts1615/1616, FTMS 191-5903, CPAI 84 Applications: The vertical burning of textil...
Automatic Reaction Calorimeter
Automatic Reaction Calorimeter Product Features: 1. It offers three calorimetry methods: heat - flow, power - compensation, and reflux, allowing users to choose according to the...
Scorch Tester Sublimation fastness tester
Scorch Tester Sublimation fastness tester In the daily process of shaping and high temperature ironing, dyes heat stability will affect the appearance of fabrics.. Dyes heating , heat trans...
Все товары поставщика

Похожие товары

FH-77 Dissolved hydrogen meter
FH-77 Dissolved hydrogen meter Продавец: Коллирон электроникс лимитед Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
Xenon Arc Weather Ometer
Xenon Arc Weather Ometer Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
Xenotest | Light Fastness Tester Si220 (SunTest)
Xenotest | Light Fastness Tester Si220 (SunTest) Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
Ozone Aging Chamber
Ozone Aging Chamber Продавец: Standard Group (Hong Kong) Limited Get a quote: Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
Plastic Smoke Density Tester F313
Plastic Smoke Density Tester F313 Продавец: Standard International Group (HK) Limited Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...