Medical Mask Differential Pressure Tester EN 149 EN 14683
Все товары поставщика
Standards:
EN 149. EN 14683. ASTM F2100. MIL-M-36954C, GB 19083. GB 2626. YY/T 0969-2013
Applications:
Medical Mask Differential Pressure Tester or medical face mask breathability tester, is a lab testing instrument for determination breathability of medica face masks, the test principle is, through measuring the differential pressure required to draw air through a measured surface area at a constant air flow rate, to test the air exchange pressure of the medical face mask material, which indicates the breathability of medical face masks.
Built-in water-filled differential manometer is used to measure the differential pressure, a mass flow meter is used for measurement of the airflow. An electric vacuum pump draws air through the medical mask breathability tester and a needle valve is used to adjust the airflow rate.
Medical face masks differential tester complies with standards like EN 149. EN 14683. ASTM F2100. MIL-M-36954C, GB 19083. GB 2626. YY/T 0969-2013.
Specifications:
Air source: Suction pump
Air flow: 8L/min
Sealing method: Mechanical face seal
Diameter for circular sample holder: Ф25mm
Differential pressure transducer:0-500Pa
Display: Digital display
Power supply:220 AC 50Hz
Dimension: 550mm×400mm×700mm
21.65inch×15.75inch×23.62inch
Net weight: 40 kg
88.18lb
Feature:
Suction chamber air source to provide the pump.
High resolution differential pressure transducer with digital display for results.
Special sample holder to ensure holding sample
Отправить запрос, связаться с поставщиком
Другие товары поставщика
| Anti-drilling Velvet Fabric Tester | Anti-drilling Velvet Fabric Tester - Material and Parts of Automotive - standardStandards: Standards BS EN 12132-2:Feather and down - Methods of... | |
| Coating abrasion resistance tester | Product Introduction: The determination of scratch resistance of the coating is very similar to the scratch test of the coating, but this test met... | |
| Seam Fatigue Tester | Seam Fatigue Tester - Automotive Interior - standard Standards: Toyota TSL5101G Section 3.7, GMW 3405, Nissan M-0154, Ford Motor Co. BN 106-02,... | |
| Aperture analyzer | An Aperture Analyzer is a specialized instrument used to measure the size and distribution of pores or openings (apertures) within various material... | |
| Yarn Appearance Board Winder ASTM 2255 GB 9996 | Standards: ASTM 2255.GB 9996 Applications: Yarn Board (Board Winder), to assess the evenness, hairiness, neps and other imperfections in a repre... |
Похожие товары
| Plastic Smoke Density Tester F313 | Продавец: Standard International Group (HK) Limited | The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ... | |
| Xenon Test Chamber | Продавец: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... | |
| Single Cable Vertical Flame Tester | Продавец: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... | |
| Safety Helmet Flammability Tester | Продавец: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... | |
| Furniture flammability tester | Продавец: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
















