Precision Fiber Microtome ISO 137 IWSTM 24

• 

Standards:

ASTM D2130. BS 2043. DIN 53811. ISO 137. IWSTM 24. IWTO 8-6

Applications:

Precision Fiber Microtome is used to produce accurate cross-sectional specimens of fibre for further examination under a microscope. Fiber cross sections of varying thickness from 10 microns are produced for microscopic examination, measurement and identification.

Product Information:

A degreased bundle of fibre is inserted into the slot on the top of the Microtome. An embedding

medium is applied to the bundle and allowed to dry. The fibre bundle is placed on the ejector and the micrometer wheel is used to determine the required parameters of the precision cut.

Cross-sectioning reveals certain characteristics that may be used to identify fibres, including:

1.Contour of the fibre

2.Thickness of the cuticle layer

3.Presence of medulla – if present, its type, shade, contour in relation to that of the fibre, and position in the fibre

4.Presence of pigment – if present, its distribution whether it is sparse, dense or in large aggregates, and whether it is most dense near the medulla or near the cuticle or arranged in bi-lateral form

5.Dye penetration

Operation Instructions of Precision Fiber Microtome:

1.Turn the micrometer wheel to the end.

2.Screw off the two screws on the cover, remove the cover.

3.Insert the fibre into the slot of the cover showing a small cut out.

4.Tighten the screws up, push the pushing plate to the side of the slot to compress the fibre, lock the nut on the plate.

5.Cut the fibre along the cover with the blade.

6.Turn the micrometer wheel until showing the required parameters.

7.Take drops of collodion on it.

8.Cut the fibre along the cover with the blade again.

Technical Parameters:

1.Weight: 3kg(6.6lb);

2.Outside dimensions: 75×150×100mm(L×W×H).

Другие товары поставщика

	Helmet Xenon Aging Tester/ safety helmet aging test equipment/ Helmet Xenon Lamp Aging Tester	Standards GB/T2014-9-19. ISO 4892 ASTM G151. G154. D4329 d4587、d4799、sae j2020 Xenon lamp aging test box structure 1. the box is molded by C...
	Seat Ingress/Egress Simulation Tester	Standard ISO 16840(Wheelchair Seating - Test Methods for Determining Mechanical Properties) FMVSS 207(Federal Motor Vehicle Safety Standard for S...
	Safety Testing Equipment for Explosive Limits/ Explosion Boundary Tester/ High-Temperature High-Pressure Explosion Tester	Reference Standards: EN 1839 ASTM E918 ASTM E2079 EN 15967 UL9540A Product Features: 1. Designed with a modular concept to flexibly meet various...
	Shoe Peel Tester	Product Introduction: Upper peeling strength tester is suitable for testing the peeling strength between the sole and the upper of the shoe, the p...
	Hot Pressing Sublimation Colorfastness Tester	Standards: GB/T 5718 Textiles color fastness test. P01: Colour fastness to dry heat (excluding heat pressing) GB/T 6152 Textiles; tests for colo...

Похожие товары

	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	The F313 Plastic Smoke Density Tester is a precision instrument designed to measure the specific ...
	Xenon Test Chamber	Продавец: Standard International Group (HK) Limited	Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli...
	Single Cable Vertical Flame Tester	Продавец: Qinsun Instruments Co., LTD	Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ...
	Safety Helmet Flammability Tester	Продавец: Qinsun Instruments Co., LTD	Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda...
	Furniture flammability tester	Продавец: Qinsun Instruments Co., LTD	Product details Furniture flammability tester is mainly used to test the combustion performance ...