Chrysler Bending Tester
Brief Introduction
Chrysler bending tester is designed for bending and folding manner by testing base fabric adhesion of the coating material,
ie mechanical stability of the coating.Design Basis Chrysler laboratory test method LP-463LB-9-01.
This test characterizes the degree of adhesion about the vinyl coated fabric and leather fabric coating material.
Also it can be vinyl coated fabrics, leather, unsupported rupture, whitening, cracking,
lamellar separation of vinyl and other soft furnishings and other materials
Product Description
A tester simultaneously tests four samples, including three bend specimens and a folded specimen.
When the bending jig sample is clamped at both ends, and taut, holding one end is fixed and the other end of the horizontal movement,
the bending test.The folded ends of the sample close clamped between two opposing plates, a 12lb load is applied in the folding area.
If possible, close the flat to exert the appropriate pressure.Bend specimens’ tension with a fixed weight. Tension must be controlled.
Technical Parameter
1. Desktop;
2. Bending test stations: 3 stations;
3. Folding stations: 1 station;
4. Each sample holder may be separately provided on the specimen holder and tension;
5. The rod Working stroke: 70mm; (2.75in.)
6. Fixture spacing: (. 6in) 152mm;
7. Working frequency: 35 times / min;
8. The bending load test: Each sample 36N (8lbf.), Adjustable;
9. The folding load test: After the closure 641N (12lbf.);
10. The bend test specimen size: 76 × 203mm; (3 × 8in.)
11. The folding test sample size: 129 × 129mm; (5 × 5in.)
12. The feature can be manually reset electronic counters;
13. Electronic Counter: 6 digits;
14. Dimensions: 36 × 12 × 20 (length × width × height).
在线联系供应商
Other supplier products
 |
Respirator Fit Tester | Product Information The Protective Mask Leak Tester is a portable device designed to detect the service performance and applicability of protectiv... |
 |
Spinal Pedicle Screw-Rod System Compressive Fatigue Testing Machine | Standard YY/T 0857-2011 (China): Specifies compression fatigue testing protocols for spinal pedicle screw-rod systems, including load ratios, fr... |
 |
Safety Helmets Impact and Penetration Resistance Tester | Standard GB/T 2811-2019(China’s national standard for helmet safety and impact resistance) GB/T 2812-2006/XXXX(Testing methods for impact a... |
 |
Oxidizing liquid time pressure tester/ | Product Description： Conforms to UN Recommendations on the Transport of Dangerous Goods - Manual of Tests and Criteria 11.6.1 Test 1(c)(i): Time... |
 |
Seam Fatigue Tester | Seam Fatigue Tester - Automotive Interior - standard Standards: Toyota TSL5101G Section 3.7, GMW 3405, Nissan M-0154, Ford Motor Co. BN 106-02,... |
Same products
 |
FH-77富氢测试笔 | 卖方: 科立龙电子股份有限公司 | 产品说明： 用于测量氢气水（富氢水）和氢气水发生器的溶解氢含量。 特征： 1、电极更换方便 智能、携带方便、操作方便、实用； 产品广泛应用于食品、环卫、地质勘探、冶金、地表水、 ... |
 |
Xenon Arc Weather Ometer | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ... |
 |
Xenotest | Light Fastness Tester Si220 (SunTest) | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ... |
 |
Ozone Aging Chamber | 卖方: Standard Group (Hong Kong) Limited | Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum... |
 |
Plastic Smoke Density Tester F313 | 卖方: Standard International Group (HK) Limited | Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ... |
