Metallic Cables and Wire Ropes Mechanical Property Testing Machine

Standard

YY/T 0812-2010 (China): Specifies mechanical testing protocols for metal cables/cables used in fracture fixation, including fatigue strength and load-to-failure requirements.

ASTM F2180-19 (International): Defines methodologies for evaluating the dynamic fatigue performance of orthopedic cable systems under cyclic loading.

ISO 12177-3: Additional compliance for tension-tension fatigue testing of surgical cables.

Product Advantages

Multi-Axial Loading: Simultaneous tension/torsion control replicates in vivo stress patterns (5Hz fatigue cycles).

High-Cycle Endurance: 1.000.000-cycle capacity with ±0.05% load accuracy at 5Hz operation.

Biorelevant Simulation: 37±1°C saline bath with protein skimmer for in vitro corrosion testing.

Smart Fixturing: Self-centering clamps accommodate cables (1.0–5.0 mm diameter) and cable systems.

AI-Powered Analytics: Machine learning identifies fatigue initiation sites in real-time.

Regulatory Compliance: Pre-loaded YY/T 0812/ASTM F2180 protocols with automated reporting.

Product Features

Electromagnetic Servo Actuator: 10 kN tensile/5 Nm torsional capacity with programmable load ratios (R=0.1–10).

Dynamic Load Control: 0.1–30 Hz frequency range with sine/square/random waveforms.

Thermal-Mechanical Chamber: 37±0.5°C recirculating saline bath with anti-evaporation design.

High-Resolution Imaging: Built-in 5MP camera system for fretting/corrosion analysis.

Safety Suite: Emergency stop, overload clutches, and leak detection system.

Modular Design: Dual-station configuration enables simultaneous specimen testing.

Accessories

Cable Fixture Kit:

Self-centering clamps (1.0–5.0 mm cable compatibility)

Torsion adapters for multi-strand cables

Thermal-Mechanical Bath:

20L capacity with recirculating pump

Corrosion-resistant titanium interior

CableTest Pro Software:

Automated S-N curve generation and fatigue limit calculation

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated micrometer set (0.01–1.00 mm)

Cable alignment jigs (ASTM F2180 compliant)

Calibration Bundle:

NIST-traceable force/torque calibration weights

LVDT verification tool

Safety Kit:

Leak detection system

Acoustic enclosure with 25 dB noise reduction

Technical Parameters

Parameter	Specification
Max. Tensile Load	±10.000 N (0.01 N resolution)
Max. Torsional Moment	±5 Nm (0.001 Nm resolution)
Frequency Range	0.1–30 Hz (0.01 Hz increments)
Load Ratio (R)	0.1–10 (adjustable)
Cable Diameter Range	1.0–5.0 mm (0.01 mm resolution)
Saline Bath Temperature	37±0.5°C (PT1000 sensor)
Data Sampling Rate	10 kHz (synchronized across 8 channels)
Power Requirements	220V/110V ±10%, 50/60Hz, 1.800W
Dimensions (W×D×H)	600 × 500 × 800 mm
Weight	90 kg (net) / 105 kg (with bath)
Noise Level	<55 dB (A-weighted)

Другие товары поставщика

	Helmet Webbing Micro - displacement Abrasion Tester	Main Purposes It is used to detect the abrasion condition of the webbing, the micro - displacement performance of the webbing, and the fatigue lif...
	Flame and Radiant Test Devices	Product description:Thermal protection performance testerused for the determination heat radiation performance of the single or multi-layer fabric ...
	Leakage negative pressure tester	Application Medical Quality Control: Ensures syringes and infusion sets meet strict leakage standards to protect patient safety. Pharmaceutical M...
	Direcct flame impingement Tester	Introduction The testerisdesignedaccording to the BS476-12:1991.Method of test for ignitability of products by direct flame impingement.The accura...
	Wear Track Profilometer	Applicable standards When the probe type material surface abrasion measuring instrument is tested, it usually needs to follow certain standards an...

Все товары поставщика

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...