Medical injection needle puncture force tester

• 

The needle puncture force simulates the skin tester with a 5.7-inch (120 x 90) single color LCD touch screen, which is displayed in the Chinese menu. Nominal specification, pipe wall, test number, pressure, upward, downward, time, calibration.

The keyboard controls the menu on the LCD screen, and the airborne print test data. Real-time display of puncture force and peak force data can show maximal puncture force and F 5 peak force. The needle puncture force simulates the complete character of the skin tester.

It is designed and manufactured in accordance with the relevant provisions of GB15811 "disposable sterile injection needle".

Standards

GB15811-2016

ISO 17025

Principle

The puncture force of the injection needle was assessed by the maximum peak force measured at the time of the simulated skin using a puncture force test device.

Partial list

1. Main engine

2. Printing paper 1 roll.

3. A set of clamps.

Weight one set.

5. One-year warranty

6. Operation instructions

7. The instrument is free to upgrade service according to national standards.

procedure

Will be needle and simulate the skin in the 22 ℃ plus or minus 2 ℃ for at least 24 h, and at the same temperature test;

The suitable size of the simulated skin clamp on the fixture shall not have any obvious stretching or compression force applied to the simulated skin.

The needle is installed on the device, and its axis is perpendicular to the surface of the simulated skin, and the tip points to the center of the circular puncture zone.

Set the moving speed to 100mm/min.

Start the testing device.

In the process of puncture, the maximum sharp value or record force/displacement diagram was measured simultaneously.

Parameters

Nominal specification: 0.3 ~ 1.2mm;

Test range: 0.10 ~ 5.00N, accuracy: + 0.01N;

Mobile speed: 100mm/min;

(presented) simulated skin: polyurethane membrane material conforms to GB15811 standard;

Printing method: can print 8. 13 or 20 test data and average puncture force and deviation value each time.

Net weight: 11kg dimensions: 400 x 290 * 240 (mm)

Другие товары поставщика

	New energy wire and cable extrusion & scraping tester	Product Introduction: The new energy wire and cable extrusion jacket scratching tester is used to test the scratching resistance of the plastic ja...
	Hydrogen Sulfide Corrosion Resistance Test Chamber	Referenced Standards: Complies with national standard GB/T 978.9-88 "Corrosion Test of Metal and Non-Metal Coatings Under Condensing Sulfur Dioxid...
	Salt fog corrosion resistance tester	Meet the standard: GB/T2423.17 Product Introduction: This type of salt spray test chamber is one of the artificial climate environmental “...
	Minimum Ignition Temperature (MIT) – Dust Cloud Tester	Description Dust Cloud Minimum Ignition Temperature Tester is mainly used to assess the explosiveness of dust in the production and processing pla...
	Ink Drying Oven / Ink Drying Chamber	How it works: The working principle of the ink drying instrument is based on simulating the drying environment of the ink in the printing process,...

Похожие товары

	Custom Stainless Components for OEM Applications	Продавец: Yongjia County Yaokang Technology Co., Ltd.	Our stainless steel float balls are designed for float valves, water tanks, and industrial liquid...
	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...