Wet leakage current test system of photovoltaic module

Standard

IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval

UL 61730: Safety Standard for Photovoltaic Modules

ISO 17025: General Requirements for the Competence of Testing and Calibration Laboratories

CE Certification(Conformité Européenne)

Product Advantages

IEC 61215 Compliance

22±3°C Temperature Control: Ensures consistent test conditions for wet insulation resistance measurements.

<3.500 Ω·cm Liquid Resistivity: Guarantees accurate leakage current detection per standard requirements.

Multi-Directional Spray Simulation

360° Adjustable Nozzles: Replicates rain, dew, and irrigation scenarios for PID testing.

Variable Flow Control: 0–10 bar pressure adjustment for customizable exposure intensity.

Corrosion-Resistant Design

15mm Plexiglass Tank: Withstands salt spray and UV exposure without degradation.

316L Stainless Steel Fittings: Prevents electrolyte contamination during prolonged testing.

Safety First

Ground Fault Interrupter (GFI): 30mA trip threshold for operator protection.

Door Interlock System: Halts testing if enclosure is opened during wet cycles.

Smart Data Acquisition

16-Bit Resolution ADC: Captures microamp-level leakage currents with 0.1% accuracy.

AI-Powered Diagnostics: Flags insulation defects and predicts PID degradation risks.

Product Features

Dual-Zone Temperature Control: Separate heating/cooling circuits for water and ambient air.

7” Touchscreen HMI: Preloaded IEC 61215 test sequences with customizable hold times.

Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for anomalies.

Self-Cleaning System: Automated tank drainage and nozzle flushing protocols.

Modular Design: Expandable from single-module to 10-module parallel testing.

Accessories Included

Testing Kit:

4x PV module test fixtures (adjustable for frameless/framed modules).

10x insulated test leads with alligator clips.

Software Suite:

License key forLeakTest Pro(Windows/Linux).

1-year free access to cloud-based I-V curve analyzer.

Calibration & Safety:

NIST-traceable conductivity meter.

Emergency eyewash station (wall-mounted).

Maintenance Kit:

Spare acrylic tank seal and nozzle gaskets.

Tank cleaning solution (non-corrosive).

Documentation:

Multilingual quick-start guide (printed + digital).

Compliance certificates for IEC/UL/ISO standards.

Technical Parameters

Parameter	Specification
Test Tank Dimensions	2.100mm (W) × 1.000mm (D) × 250mm (H)
Tank Material	15mm Cast Acrylic (Plexiglass)
Temperature Range	15°C to 40°C (operational)
Temperature Stability	±0.5°C (at 22°C setpoint)
Liquid Resistivity	<3.500 Ω·cm (deionized water recommended)
Spray Pressure	0–10 bar (adjustable)
Flow Rate	0–15 L/min (per nozzle)
Power Supply	230V AC, 50/60Hz (single-phase)
Dimensions	2.500mm (W) × 1.200mm (D) × 1.500mm (H)
Weight	350 kg (net) / 450 kg (gross)

Другие товары поставщика

	Coating thickness gauge film thickness tester	Standard Coating Thickness Gauge complies with international standards includingASTM B499,ASTM D1400,ISO 2178,ISO 2360, andGB/T 4956, ensuring rel...
	Automotive wire cyclic bending testing machine	StandardThis testing machine aligns with global automotive industry standards for wire harness reliability, includingISO 6722(Road vehicles –...
	Large diameter blasting test machine	Standard ASTM D1599: Compliant for short-time hydraulic failure testing of thermoplastic pipes under linear pressure ramp. ISO 1167: Configurable...
	Deval abrasion testing machine	Product Introduction: Diphal abrasion testing machine is mainly used for stone abrasion rate test, suitable for European standards, French standar...
	Wear Track Profilometer	Main uses: The probe type material surface abrasion measuring instrument is a kind of high precision measuring equipment, its main purpose is to a...

Все товары поставщика

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...