Wet leakage current test system of photovoltaic module
Standard
IEC 61215: Terrestrial Photovoltaic (PV) Modules – Design Qualification and Type Approval
UL 61730: Safety Standard for Photovoltaic Modules
ISO 17025: General Requirements for the Competence of Testing and Calibration Laboratories
CE Certification(Conformité Européenne)
Product Advantages
IEC 61215 Compliance
22±3°C Temperature Control: Ensures consistent test conditions for wet insulation resistance measurements.
<3.500 Ω·cm Liquid Resistivity: Guarantees accurate leakage current detection per standard requirements.
Multi-Directional Spray Simulation
360° Adjustable Nozzles: Replicates rain, dew, and irrigation scenarios for PID testing.
Variable Flow Control: 0–10 bar pressure adjustment for customizable exposure intensity.
Corrosion-Resistant Design
15mm Plexiglass Tank: Withstands salt spray and UV exposure without degradation.
316L Stainless Steel Fittings: Prevents electrolyte contamination during prolonged testing.
Safety First
Ground Fault Interrupter (GFI): 30mA trip threshold for operator protection.
Door Interlock System: Halts testing if enclosure is opened during wet cycles.
Smart Data Acquisition
16-Bit Resolution ADC: Captures microamp-level leakage currents with 0.1% accuracy.
AI-Powered Diagnostics: Flags insulation defects and predicts PID degradation risks.
Product Features
Dual-Zone Temperature Control: Separate heating/cooling circuits for water and ambient air.
7” Touchscreen HMI: Preloaded IEC 61215 test sequences with customizable hold times.
Remote Monitoring: Wi-Fi/Ethernet connectivity with SMS/ alerts for anomalies.
Self-Cleaning System: Automated tank drainage and nozzle flushing protocols.
Modular Design: Expandable from single-module to 10-module parallel testing.
Accessories Included
Testing Kit:
4x PV module test fixtures (adjustable for frameless/framed modules).
10x insulated test leads with alligator clips.
Software Suite:
License key forLeakTest Pro(Windows/Linux).
1-year free access to cloud-based I-V curve analyzer.
Calibration & Safety:
NIST-traceable conductivity meter.
Emergency eyewash station (wall-mounted).
Maintenance Kit:
Spare acrylic tank seal and nozzle gaskets.
Tank cleaning solution (non-corrosive).
Documentation:
Multilingual quick-start guide (printed + digital).
Compliance certificates for IEC/UL/ISO standards.
Technical Parameters
| Parameter | Specification |
|---|---|
| Test Tank Dimensions | 2.100mm (W) × 1.000mm (D) × 250mm (H) |
| Tank Material | 15mm Cast Acrylic (Plexiglass) |
| Temperature Range | 15°C to 40°C (operational) |
| Temperature Stability | ±0.5°C (at 22°C setpoint) |
| Liquid Resistivity | <3.500 Ω·cm (deionized water recommended) |
| Spray Pressure | 0–10 bar (adjustable) |
| Flow Rate | 0–15 L/min (per nozzle) |
| Power Supply | 230V AC, 50/60Hz (single-phase) |
| Dimensions | 2.500mm (W) × 1.200mm (D) × 1.500mm (H) |
| Weight | 350 kg (net) / 450 kg (gross) |
Send product request
Other supplier products
 |
multi-finger scratch/mar tester | Standards:GB/T 2918，GB/T 6151，GB/T 8424.3，PV3952，BMW GS97034-2，BMW GS97034-9，GMN 3943-2003，FLTM BN 108-13，STD1024-3113，GMW 14698-A，GMW 14688Product... |
 |
Electrochemical Corrosion and Wear Testing Machine | Standard ASTM G119: A standard for evaluating synergistic corrosion-wear performance, particularly for biomedical implants in simulated body f... |
 |
Hard Casing Retardant Performance Test Machine | Introduction Thismachuineis according to the provisions of paragraph 6.10 JG3050-1998 in combustion testing requirements to develop and produce. Th... |
 |
Safety Helmets Against Molten Metal Splashing Tester | Standard GB/T 2812-XXXX: Safety Helmets – Test Methods for Molten Metal Resistance (Draft Standard) GB 2811-2019: Head Protection – G... |
 |
Pressure Transmission Flow Meter meter | The Pressure Transmission and Flow Tester is widely used in multiple fields and is mainly used to test the pressure transmission and flow performan... |
Same products
 |
Xenon Test Chamber | Seller: Standard International Group (HK) Limited | Features and Benefits 1.The use of xenon arc lamp as a light source, can simulate the full sunli... |
 |
Single Cable Vertical Flame Tester | Seller: Qinsun Instruments Co., LTD | Introduction Single Cable Vertical Flame Tester is used for the vertical flame propagation of a ... |
 |
Safety Helmet Flammability Tester | Seller: Qinsun Instruments Co., LTD | Product Introduction: Safety hat flame retardant performance tester for safety hat flame retarda... |
 |
Furniture flammability tester | Seller: Qinsun Instruments Co., LTD | Product details Furniture flammability tester is mainly used to test the combustion performance ... |
 |
Flame retardant testing machine | Seller: Qinsun Instruments Co., LTD | Feature highlights: Flame Retardant Tester is designed for testing plastic runway surface layers... |
