Dental Implants Static Torsion Tester

Standard

ISO 13498: Specifies static torsion testing protocols for dental implants, including torque application rates, failure criteria, and data reporting requirements.

ASTM F2077-17: Complementary compliance for mechanical performance evaluation of dental prosthetic components.

Product Advantages

Compact Ergonomics: Lightweight (35 kg) design with integrated touchscreen control panel for benchtop use.

Ultra-Precision Torque Control: 0.001 Nm resolution ensures compliance with ISO 13498's 0.01 Nm/s loading rate requirements.

Smart Fixturing System: Quick-change collets accommodate implant diameters (3.0–6.5 mm) and lengths (8–18 mm).

Automated SOP Protocols: Pre-loaded ISO 13498 test sequences with real-time torque-angle curve generation.

Biorelevant Simulation: 37±1°C environmental chamber with saline mist system for in vitro corrosion testing.

Global Compliance: CE-marked and FDA-ready documentation package for regulatory submissions.

Product Features

Servo-Electric Actuator: 50 Nm peak torque capacity with programmable rotation angles (0°–360°).

Dynamic Angle Measurement: 0.001° resolution encoder tracks micro-rotational movements.

Axial Force Simulation: Integrated 5 kN load cell for combined torsion/compression testing.

Thermal-Mechanical Chamber: 10L capacity with rapid temperature control (20°C–50°C).

High-Resolution Imaging: Built-in 2MP camera system for screw thread damage analysis.

Safety Suite: Emergency stop, overload clutches, and torque limiting protection.

Dental Implant Fixture Kit:

Self-centering collets (3.0–6.5 mm implant compatibility)

Thread engagement gauges (ISO 13498 compliant)

Thermal-Mechanical Chamber:

10L capacity with rapid heating (10°C/min)

Corrosion-resistant titanium interior

TorsionMaster Pro Software:

Automated torque-angle curve generation and failure analysis

21 CFR Part 11-compliant audit trail with blockchain timestamping

Remote monitoring via iOS/Android app

Operator Kit:

Calibrated torque wrench set (0.1–10 Nm)

Implant alignment jigs (ASTM F2077 compliant)

Calibration Bundle:

NIST-traceable torque calibration weights

Angular encoder verification tool

Safety Kit:

Torque limiting clutches

Acoustic enclosure with 25 dB noise reduction

Technical Parameters

Parameter	Specification
Max. Torque	±50 Nm (0.001 Nm resolution)
Rotation Range	0°–360° (0.001° resolution)
Torque Application Rate	0.01–0.10 Nm/s (ISO 13498 compliant)
Axial Force Capacity	±5.000 N (5 N resolution)
Temperature Control	20°C–50°C (PT1000 sensors)
Data Sampling Rate	10 kHz (synchronized across 8 channels)
Power Requirements	220V/110V ±10%, 50/60Hz, 800W
Dimensions (W×D×H)	450 × 400 × 600 mm
Weight	35 kg (net) / 45 kg (with chamber)
Noise Level	<50 dB (A-weighted)

Другие товары поставщика

	Mask Visual Field/Vision Testing Equipment	Application: Mask Visual Field Tester to determine whether field of vision under the mask meets the standard requirement or not. Standards: GB 2...
	Syringe piston thrust tester	Product introduction The syringe piston thrust tester is a kind of high precision and high stability measuring equipment, which is used to measure...
	Sharp edge meter	Standards : ASTM F963 4.8. EN71-1998 8.14. GB6675-2003 A.5.9. 16CFR 1500.48 Basic Configuration： Sharp Edge Tester: 1 unit Foot switch: 1 set ...
	The textile photothermal performance tester	Application ScopeThe textile photothermal performance tester is mainly used to test textile products' photothermal storage performance, heat-blocki...
	Car seat components strength test bench	Applicable standards: The National Standard of the People's Republic of China （GB） : such asGB 15083, this standard specifies the strength require...

Все товары поставщика

Похожие товары

	FH-77 Dissolved hydrogen meter	Продавец: Коллирон электроникс лимитед	Pen type dissolved hydrogen detector / dissolved hydrogen meter: used to measure the dissolved hy...
	Xenon Arc Weather Ometer	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App: +86 181 0160 0864 SI4000Xenon Arc Weather Ometer utilizes a xenon lamp ...
	Xenotest | Light Fastness Tester Si220 (SunTest)	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 180 0160 0864 A Light Fastness Tester, or Xenon Tester, Accelerated ...
	Ozone Aging Chamber	Продавец: Standard Group (Hong Kong) Limited	Get a quote： Whats/App:+86 156 1874 6768 The Ozone Aging Chamber is a precision testing instrum...
	Plastic Smoke Density Tester F313	Продавец: Standard International Group (HK) Limited	Whats/App: +86 156 1874 6768 Web: standard-groups.com The F313 Plastic Smoke Density Tester is ...