Print friction tester
Product Introduction:
Print friction testing machine is suitable for print, ink, photosensitive layer of PS plate, gloss oil and related products surface wear resistance test, effective analysis of print friction resistance, ink layer off, PS plate printing resistance is low and other products coating hardness is poor. Friction testing machine using microcomputer control system, users only need to install the sample to be tested, the instrument will automatically complete the whole test process. It is widely used in printing enterprises, packaging enterprises, quality inspection and other units.
Test principle:
The friction test is carried out on the surface of the printed matter under a certain pressure. After a certain number of times, the sample is taken off to test the surface density. The ratio between the clean offset paper and the pre-friction is the wear resistance of the ink layer.
Meet the standard:
GB/T 7706-2008
Scope of application:
Printed matter: Test of wear resistance of surface layer
Ink: ink, polish wear resistance test
Paper packaging: The paper packaging of printed matter of poor friction and other products coating hardness difference test
Technical parameters:
Friction pressure: 20±0.2N（different pressure can be customized）
Friction speed: 21, 43, 85, 106r/min adjustable
Friction area: 100（L）mm×50（B）mm
Friction stroke: 60mm
Friction Times: 0 —— 999999 Times
Sample size: 230（L）mm×50（B）mm
Power supply: 220V 50Hz
Environment requirements: Temperature: 15℃-35℃， relative humidity: not more than 70%, no condensation
Standard configuration:
Main engine, standard friction block
Отправить запрос, связаться с поставщиком
Другие товары поставщика
 |
MARK-II anti-slip testing machine | Product Introduction: Paste the cut sample on the test fixture of the portable MARK-II anti-slip testing machine, put down the weight of the rotat... |
 |
Dry Sand Rubber Wheel Wear Tester | Standard ASTM G65 JBT_7705 Applicable standards Dry and wet abrasive wear testing machines usually need to follow certain standards and specifi... |
 |
Metal ring friction and wear testing machine | Evaluate the wear resistance of the material: By simulating the friction process, real-time monitoring of friction, temperature, wear and other pa... |
 |
Car seat foam performance tester | Applicable standards: GB/T 6670-2008"Determination of falling ball resilience of soft foam polymeric materials" : This standard specifies the test... |
 |
Luminous Afterglow Performance Tester | Luminous Afterglow Performance Tester The luminous afterglow performance tester is suitable for testing the luminous afterglow performance of vari... |
Похожие товары
 |
Air Permeability Tester STD- F8 | Продавец: Standard International Group (HK) Limited | The Air Permeability Tester is designed to quickly and accurately measure the breathability and p... |
 |
Surface Performance Tester STD-FB4 - A | Продавец: Standard International Group (HK) Limited | Introduction TheSurface Tester analyzes finger movements-particularly, strokes-performed by arti... |
 |
Compression Tester STD - FB3 - A | Продавец: Standard International Group (HK) Limited | TheCompression Tester analyzes hand movements-particularly, pushing with a finger-performed by ar... |
 |
Single - Strand Bending Tester STD - FB2 - SH | Продавец: Standard International Group (HK) Limited | Standards ASTM A370. ASTM A416. ISO6934.4 The Single Fiber Bending Tester makes it possible to ... |
 |
Bending Tester STD- FB2 - S | Продавец: Standard International Group (HK) Limited | Compliance Standards ASTM D790 (Plastics Flexural Properties) ISO 178 (Flexural Strength of Rig... |
